{
  "$schema": "https://www.atlas-contacte.de/data/lamellen.schema.json",
  "$id": "https://www.atlas-contacte.de/data/lamellen.json",
  "title": {
    "de": "Kontaktlamellen von ACA Atlas Contacte: Größenmatrix des Konfigurators und technische Daten",
    "en": "Contact lamellae by ACA Atlas Contacte: configurator size matrix and specifications"
  },
  "description": {
    "de": "Maschinenlesbare Produktdaten der drei Kontaktlamellen-Bauarten (Blattfeder-, Drehfeder- und Hochstrom-Kontaktband) der ACA Atlas Contacte GmbH in Wehr (Baden): Standardgrößen und Optionen des Lamellen-Konfigurators sowie die Werte aus Datenblättern und Einbauzeichnungen mit Einheiten und Quellen.",
    "en": "Machine-readable product data of the three contact lamella types (leaf spring, torsion spring and high-current contact band) made by ACA Atlas Contacte GmbH in Wehr, Germany: standard sizes and options of the lamella configurator plus the values from datasheets and installation drawings, with units and sources."
  },
  "dateModified": "2026-11-16",
  "inLanguage": ["de", "en"],
  "publisher": {
    "@id": "https://www.atlas-contacte.de/#organization",
    "name": "ACA Atlas Contacte GmbH",
    "url": "https://www.atlas-contacte.de/",
    "email": "info@atlas-contacte.de",
    "telephone": "+49 7761 4420",
    "address": "Wallbacher Straße 5, 79664 Wehr, Germany"
  },
  "units": {
    "length": "mm",
    "current": "A",
    "resistance": "mΩ",
    "force": "N",
    "temperature": "°C",
    "angle": "°",
    "quantity": "pcs"
  },
  "symbols": {
    "D": {
      "de": "Steckdurchmesser (Nenndurchmesser des Stifts, Bohrung der Buchse)",
      "en": "mating diameter (nominal pin diameter, socket bore)"
    },
    "L": { "de": "Länge der Lamelle bzw. des Bandstücks", "en": "length of the lamella or band piece" },
    "S": { "de": "Materialdicke", "en": "material thickness" },
    "A": {
      "de": "Beinchenwinkel des Drehfeder-Kontaktbands",
      "en": "leg angle of the torsion spring contact band"
    }
  },
  "notes": {
    "de": [
      "Werte aus den Datenblättern und Einbauzeichnungen von ACA Atlas Contacte. Ausdrücke wie \"D + 1,6\" beziehen sich auf den Steckdurchmesser D.",
      "Widerstände und Ströme gelten für Gegenkontakte aus versilbertem Kupfer unter idealen Bedingungen. Die Strombelastbarkeit hängt von der Einbausituation ab und ist in der Anwendung durch Messung zu prüfen.",
      "Werte mit \"kind\": \"guide\" sind Richtwerte der Strombelastbarkeit aus dem Lamellen-Konfigurator, vom Hersteller zur Veröffentlichung freigegeben. Sie sind keine Datenblattwerte, je nach Einbausituation sind höhere wie niedrigere Werte möglich.",
      "Quellen (\"sources\") verweisen auf die öffentlichen Datenblätter, Einbauzeichnungen und Produktseiten von ACA Atlas Contacte.",
      "Nicht aufgeführte Werte (zum Beispiel Steckzyklen) gibt es auf Anfrage."
    ],
    "en": [
      "Values from the datasheets and installation drawings of ACA Atlas Contacte. Expressions such as \"D + 1.6\" refer to the mating diameter D.",
      "Resistances and currents apply to silver-plated copper mating contacts under ideal conditions. The current-carrying capacity depends on the installation and must be verified by measurement in the application.",
      "Values with \"kind\": \"guide\" are current-rating guide values of the lamella configurator, released for publication by the manufacturer. They are not datasheet values, and higher or lower values are possible depending on the installation.",
      "Sources (\"sources\") point to the public datasheets, installation drawings and product pages of ACA Atlas Contacte.",
      "Values not listed (for example mating cycles) are available on request."
    ]
  },
  "request": {
    "minQuantity": 100,
    "configurator": {
      "de": "https://www.atlas-contacte.de/de/anfrage/",
      "en": "https://www.atlas-contacte.de/en/request-a-quote/",
      "query": "bauart=blatt|tors|band"
    },
    "api": {
      "documentation": "https://www.atlas-contacte.de/llms.txt",
      "token": "https://www.atlas-contacte.de/api/token.php",
      "endpoint": "https://www.atlas-contacte.de/api/anfrage.php",
      "method": "POST",
      "mode": "lamella",
      "fields": {
        "common": [
          "lang",
          "token",
          "company",
          "name",
          "email",
          "phone",
          "country",
          "message",
          "consent",
          "bauart",
          "qty",
          "qty_alt1",
          "qty_alt2"
        ],
        "blatt": ["blatt_typ", "blatt_d", "blatt_l", "blatt_s", "blatt_oberflaeche"],
        "tors": [
          "tors_bandbreite",
          "tors_typ",
          "tors_d",
          "tors_l",
          "tors_s",
          "tors_winkel",
          "tors_oberflaeche"
        ],
        "band": ["band_d", "band_l"]
      }
    }
  },
  "labels": {
    "types": {
      "stecker": {
        "de": "Steckerausführung (Lamelle auf dem Stift)",
        "en": "pin version (lamella on the pin)"
      },
      "buchse": {
        "de": "Buchsenausführung (Lamelle in der Buchse)",
        "en": "socket version (lamella in the socket)"
      }
    },
    "surfaces": {
      "nickel": { "de": "vernickelt", "en": "nickel-plated" },
      "silber": { "de": "versilbert", "en": "silver-plated" },
      "gold": { "de": "vergoldet", "en": "gold-plated" },
      "ohne": { "de": "ohne Oberfläche (blank)", "en": "no plating (bare)" }
    }
  },
  "products": [
    {
      "id": "lam-leaf",
      "bauart": "blatt",
      "name": { "de": "Blattfeder-Kontaktband", "en": "Leaf spring contact band" },
      "page": {
        "de": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/blattfeder-kontaktband/",
        "en": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/leaf-spring-contact-band/"
      },
      "markdown": {
        "de": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/blattfeder-kontaktband/index.md",
        "en": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/leaf-spring-contact-band/index.md"
      },
      "configurator": {
        "url": {
          "de": "https://www.atlas-contacte.de/de/anfrage/?bauart=blatt",
          "en": "https://www.atlas-contacte.de/en/request-a-quote/?bauart=blatt"
        },
        "input": "standard-size",
        "types": ["stecker", "buchse"],
        "standardSizes": [
          { "type": "stecker", "d": 2, "l": 8, "s": 0.15 },
          { "type": "stecker", "d": 3, "l": 8, "s": 0.15 },
          { "type": "stecker", "d": 4, "l": 8, "s": 0.17 },
          { "type": "stecker", "d": 4, "l": 12, "s": 0.2 },
          { "type": "stecker", "d": 6, "l": 12, "s": 0.2 },
          { "type": "stecker", "d": 8, "l": 12, "s": 0.2 },
          { "type": "buchse", "d": 1.5, "l": 5, "s": 0.1 },
          { "type": "buchse", "d": 2, "l": 5, "s": 0.1 },
          { "type": "buchse", "d": 3, "l": 12, "s": 0.2 },
          { "type": "buchse", "d": 4, "l": 8, "s": 0.15 },
          { "type": "buchse", "d": 4, "l": 12, "s": 0.2 },
          { "type": "buchse", "d": 5, "l": 8, "s": 0.15 },
          { "type": "buchse", "d": 6, "l": 8, "s": 0.15 },
          { "type": "buchse", "d": 6, "l": 8, "s": 0.2 },
          { "type": "buchse", "d": 8, "l": 8, "s": 0.2 },
          { "type": "buchse", "d": 8, "l": 12, "s": 0.2 },
          { "type": "buchse", "d": 10, "l": 8, "s": 0.2 },
          { "type": "buchse", "d": 10, "l": 12, "s": 0.2 },
          { "type": "buchse", "d": 12, "l": 12, "s": 0.2 },
          { "type": "buchse", "d": 16, "l": 8, "s": 0.15 },
          { "type": "buchse", "d": 16, "l": 12, "s": 0.2 }
        ],
        "surfaces": ["nickel", "silber", "gold"]
      },
      "materials": [
        {
          "part": "lamella",
          "material": { "de": "Kupferberyllium (CuBe)", "en": "Beryllium copper (CuBe)" },
          "designation": "CuBe",
          "finish": {
            "de": "vernickelt, versilbert oder vergoldet, blank auf Anfrage",
            "en": "nickel, silver or gold plated, bare on request"
          },
          "source": { "ids": ["web-kl-leaf"], "confidence": "datasheet" }
        }
      ],
      "specs": [
        {
          "key": "currentRating",
          "kind": "guide",
          "label": {
            "de": "Strombelastbarkeit der Lamelle (Richtwert)",
            "en": "Current rating of the lamella (guide value)"
          },
          "unit": "A",
          "per": "lamella",
          "value": {
            "formula": "I = k × D × f",
            "variables": {
              "k": {
                "de": "Faktor je Ausführung und Materialdicke S, in A je mm",
                "en": "factor per version and material thickness S, in A per mm"
              },
              "D": { "de": "Steckdurchmesser in mm", "en": "mating diameter in mm" },
              "f": { "de": "Oberflächenfaktor", "en": "finish factor" }
            },
            "k": {
              "stecker": [
                { "s": 0.15, "k": 9 },
                { "s": 0.17, "k": 10.5 },
                { "s": 0.2, "k": 12 }
              ],
              "buchse": [
                { "s": 0.1, "k": 6 },
                { "s": 0.15, "k": 10.5 },
                { "s": 0.2, "k": 14 }
              ]
            },
            "kUnit": "A/mm",
            "roundTo": 0.5
          },
          "finishFactor": { "nickel": 1, "silber": 1.2, "gold": 1.2 },
          "condition": {
            "de": "Richtwert, je nach Einbausituation sind höhere wie niedrigere Werte möglich",
            "en": "guide value, higher or lower values are possible depending on the installation"
          },
          "source": { "ids": ["calc"], "confidence": "configurator" }
        },
        {
          "key": "minDiameter",
          "kind": "specification",
          "label": { "de": "Steckdurchmesser D ab", "en": "Mating diameter D from" },
          "value": 1.5,
          "unit": "mm",
          "source": { "ids": ["web-kl-home"], "confidence": "web" }
        },
        {
          "key": "socketVersion.bore",
          "kind": "specification",
          "label": { "de": "Buchsenausführung: Bohrung", "en": "Socket version: bore" },
          "value": "D +0.05",
          "unit": "mm",
          "source": { "ids": ["dwg-leaf-socket"], "confidence": "datasheet" }
        },
        {
          "key": "socketVersion.grooveDiameter",
          "kind": "specification",
          "label": {
            "de": "Buchsenausführung: Nutdurchmesser in der Buchse",
            "en": "Socket version: groove diameter in the socket"
          },
          "value": [
            { "s": [0.2], "value": "D + 0.7" },
            { "s": [0.15], "value": "D + 0.6" },
            { "s": [0.1], "value": "D + 0.5" }
          ],
          "unit": "mm",
          "source": { "ids": ["dwg-leaf-socket"], "confidence": "datasheet" }
        },
        {
          "key": "socketVersion.grooveWidth",
          "kind": "specification",
          "label": { "de": "Buchsenausführung: Nutbreite", "en": "Socket version: groove width" },
          "value": "L +0.25",
          "unit": "mm",
          "source": { "ids": ["dwg-leaf-socket"], "confidence": "datasheet" }
        },
        {
          "key": "socketVersion.pinDiameter",
          "kind": "specification",
          "label": { "de": "Buchsenausführung: Stiftdurchmesser", "en": "Socket version: pin diameter" },
          "value": "D −0.03",
          "unit": "mm",
          "source": { "ids": ["dwg-leaf-socket"], "confidence": "datasheet" }
        },
        {
          "key": "pinVersion.grooveDiameter",
          "kind": "specification",
          "label": {
            "de": "Steckerausführung: Nutdurchmesser im Stift",
            "en": "Pin version: groove diameter in the pin"
          },
          "value": [
            { "s": [0.2, 0.17], "value": "D − 0.7" },
            { "s": [0.15], "value": "D − 0.5" }
          ],
          "unit": "mm",
          "source": { "ids": ["dwg-leaf-pin"], "confidence": "datasheet" }
        },
        {
          "key": "pinVersion.grooveWidth",
          "kind": "specification",
          "label": { "de": "Steckerausführung: Nutbreite", "en": "Pin version: groove width" },
          "value": "L +0.25",
          "unit": "mm",
          "source": { "ids": ["dwg-leaf-pin"], "confidence": "datasheet" }
        }
      ],
      "specTables": {
        "de": [
          {
            "id": "technische-daten",
            "title": "Technische Daten Blattfeder-Kontaktband",
            "url": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/blattfeder-kontaktband/#technische-daten",
            "rows": [
              {
                "label": "Steckdurchmesser D",
                "value": "ab 1,5 mm (Buchsenausführung), Steckerausführung ab 2 mm in den Standardgrößen",
                "source": "aca-kontaktlamellen.de, Startseite, Konfigurator-Größentabelle",
                "sourceUrls": ["https://www.atlas-contacte.de/de/anfrage/?bauart=blatt"]
              },
              {
                "label": "Länge L (Standardgrößen)",
                "value": "5 / 8 / 12",
                "unit": "mm",
                "source": "Lamellen-Konfigurator, Größentabelle",
                "sourceUrls": ["https://www.atlas-contacte.de/de/anfrage/?bauart=blatt"]
              },
              {
                "label": "Werkstoff",
                "value": "Kupferberyllium (CuBe), relaxationsbeständig",
                "source": "aca-kontaktlamellen.de, Blattfeder, Zeichnungen",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Oberfläche",
                "value": "Nickel, Silber oder Gold, blank auf Anfrage",
                "source": "Konfigurator",
                "sourceUrls": ["https://www.atlas-contacte.de/de/anfrage/?bauart=blatt"]
              },
              {
                "label": "Standardprogramm Steckerausführung",
                "value": "D 2–8 mm, L 8 oder 12 mm, S 0,15–0,2 mm",
                "source": "Konfigurator, Größentabelle",
                "sourceUrls": ["https://www.atlas-contacte.de/de/anfrage/?bauart=blatt"]
              },
              {
                "label": "Standardprogramm Buchsenausführung",
                "value": "D 1,5–16 mm, L 5, 8 oder 12 mm, S 0,1–0,2 mm",
                "source": "Konfigurator, Größentabelle",
                "sourceUrls": ["https://www.atlas-contacte.de/de/anfrage/?bauart=blatt"]
              },
              {
                "label": "Bohrung der Buchse",
                "value": "D +0,05",
                "unit": "mm",
                "source": "Zeichnungen Blattfedertechnik",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Stiftdurchmesser",
                "value": "D −0,03",
                "unit": "mm",
                "source": "Zeichnungen Blattfedertechnik",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Nutdurchmesser in der Buchse",
                "value": "D + 0,7 mm (S = 0,2 mm), D + 0,6 mm (S = 0,15 mm), D + 0,5 mm (S = 0,1 mm)",
                "source": "Zeichnung Buchsenausführung",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-buchsenausfuehrung.pdf"
                ]
              },
              {
                "label": "Nutdurchmesser im Stift",
                "value": "D − 0,7 mm (S = 0,2 mm und 0,17 mm), D − 0,5 mm (S = 0,15 mm)",
                "source": "Zeichnung Steckerausführung",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Nutbreite",
                "value": "L +0,25",
                "unit": "mm",
                "source": "Zeichnungen Blattfedertechnik",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Lieferform",
                "value": "auf Durchmesser vorgerundet, einbaufertig",
                "source": "aca-kontaktlamellen.de, Blattfeder"
              },
              { "label": "Übergangswiderstand, Kontaktkraft, Steckkraft", "value": "auf Anfrage" },
              {
                "label": "Strombelastbarkeit der Lamelle (Richtwert)",
                "value": "I ≈ k × D (D in mm), vernickelt. Stecker k = 9 / 10,5 / 12 A für S = 0,15 / 0,17 / 0,2 mm, Buchse k = 6 / 10,5 / 14 A für S = 0,1 / 0,15 / 0,2 mm. Versilbert oder vergoldet × 1,2",
                "source": "Lamellen-Konfigurator",
                "sourceUrls": ["https://www.atlas-contacte.de/de/anfrage/?bauart=blatt"]
              },
              { "label": "Temperaturbereich", "value": "auf Anfrage" },
              { "label": "Steckzyklen", "value": "auf Anfrage" }
            ],
            "note": "Werte aus den Einbauzeichnungen und dem Lamellen-Konfigurator. Elektrische Kennwerte (Übergangswiderstand, Kontaktkraft, Temperaturbereich) nennen wir auf Anfrage. Die Strombelastbarkeit ist ein Richtwert aus dem Konfigurator und hängt von der Einbausituation ab, je nach Einbau sind höhere wie niedrigere Werte möglich."
          },
          {
            "id": "standardgroessen-stecker",
            "title": "Standard­programm Stecker­ausführung",
            "url": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/blattfeder-kontaktband/#standardgroessen-stecker",
            "caption": "Maße in mm · L = Länge · S = Materialdicke · Richtwert Strom in A: Ni/Ag, Au",
            "columns": ["L", "S", "Nut-Ø", "Nutbreite", "Richtwert A"],
            "rows": [
              { "label": "D 2 mm", "values": ["8", "0,15", "1,5", "8 +0,25", "18/22"] },
              { "label": "D 3 mm", "values": ["8", "0,15", "2,5", "8 +0,25", "27/33"] },
              { "label": "D 4 mm", "values": ["8", "0,17", "3,3", "8 +0,25", "42/51"] },
              { "label": "D 4 mm", "values": ["12", "0,2", "3,3", "12 +0,25", "48/58"] },
              { "label": "D 6 mm", "values": ["12", "0,2", "5,3", "12 +0,25", "72/87"] },
              { "label": "D 8 mm", "values": ["12", "0,2", "7,3", "12 +0,25", "96/120"] }
            ],
            "note": "Werkstoff CuBe. Bohrung der Buchse D +0,05 mm. Nut-Ø und Nutbreite sind aus den Einbauzeichnungen berechnet (D − 0,7 für S = 0,2 und 0,17, D − 0,5 für S = 0,15, Nutbreite L +0,25). Richtwert der Strombelastbarkeit der ganzen Lamelle aus dem Lamellen-Konfigurator, vernickelt bzw. versilbert oder vergoldet, gerundet wie im Konfigurator: unter 100 A auf ganze Ampere, ab 100 A auf 10 A. Je nach Einbausituation sind höhere wie niedrigere Werte möglich."
          },
          {
            "id": "standardgroessen-buchse",
            "title": "Standard­programm Buchsen­ausführung",
            "url": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/blattfeder-kontaktband/#standardgroessen-buchse",
            "caption": "Maße in mm · L = Länge · S = Materialdicke · Richtwert Strom in A: Ni/Ag, Au",
            "columns": ["L", "S", "Nut-Ø", "Nutbreite", "Richtwert A"],
            "rows": [
              { "label": "D 1,5 mm", "values": ["5", "0,1", "2,0", "5 +0,25", "9/11"] },
              { "label": "D 2 mm", "values": ["5", "0,1", "2,5", "5 +0,25", "12/15"] },
              { "label": "D 3 mm", "values": ["12", "0,2", "3,7", "12 +0,25", "42/51"] },
              { "label": "D 4 mm", "values": ["8", "0,15", "4,6", "8 +0,25", "42/51"] },
              { "label": "D 4 mm", "values": ["12", "0,2", "4,7", "12 +0,25", "56/67"] },
              { "label": "D 5 mm", "values": ["8", "0,15", "5,6", "8 +0,25", "53/63"] },
              { "label": "D 6 mm", "values": ["8", "0,15", "6,6", "8 +0,25", "63/76"] },
              { "label": "D 6 mm", "values": ["8", "0,2", "6,7", "8 +0,25", "84/100"] },
              { "label": "D 8 mm", "values": ["8", "0,2", "8,7", "8 +0,25", "110/130"] },
              { "label": "D 8 mm", "values": ["12", "0,2", "8,7", "12 +0,25", "110/130"] },
              { "label": "D 10 mm", "values": ["8", "0,2", "10,7", "8 +0,25", "140/170"] },
              { "label": "D 10 mm", "values": ["12", "0,2", "10,7", "12 +0,25", "140/170"] },
              { "label": "D 12 mm", "values": ["12", "0,2", "12,7", "12 +0,25", "170/200"] },
              { "label": "D 16 mm", "values": ["8", "0,15", "16,6", "8 +0,25", "170/200"] },
              { "label": "D 16 mm", "values": ["12", "0,2", "16,7", "12 +0,25", "220/270"] }
            ],
            "note": "Werkstoff CuBe. Stiftdurchmesser D −0,03 mm. Nut-Ø und Nutbreite sind aus den Einbauzeichnungen berechnet (D + 0,7 für S = 0,2, D + 0,6 für S = 0,15, D + 0,5 für S = 0,1, Nutbreite L +0,25). Richtwert der Strombelastbarkeit wie beim Stecker aus dem Lamellen-Konfigurator, gleich gerundet. Andere Abmessungen fertigen wir auf Anfrage."
          }
        ],
        "en": [
          {
            "id": "technische-daten",
            "title": "Technical data: leaf spring contact band",
            "url": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/leaf-spring-contact-band/#technische-daten",
            "rows": [
              {
                "label": "Mating diameter D",
                "value": "from 1.5 mm (socket version), pin version from 2 mm in the standard sizes",
                "source": "aca-kontaktlamellen.de, home page, configurator size table",
                "sourceUrls": ["https://www.atlas-contacte.de/en/request-a-quote/?bauart=blatt"]
              },
              {
                "label": "Length L (standard sizes)",
                "value": "5 / 8 / 12",
                "unit": "mm",
                "source": "Lamella configurator, size table",
                "sourceUrls": ["https://www.atlas-contacte.de/en/request-a-quote/?bauart=blatt"]
              },
              {
                "label": "Material",
                "value": "Beryllium copper (CuBe), relaxation-resistant",
                "source": "aca-kontaktlamellen.de, leaf spring, drawings",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-pin-version-en.pdf"
                ]
              },
              {
                "label": "Finish",
                "value": "nickel, silver or gold, bare on request",
                "source": "Configurator",
                "sourceUrls": ["https://www.atlas-contacte.de/en/request-a-quote/?bauart=blatt"]
              },
              {
                "label": "Standard range, pin version",
                "value": "D 2–8 mm, L 8 or 12 mm, S 0.15–0.2 mm",
                "source": "Configurator size table",
                "sourceUrls": ["https://www.atlas-contacte.de/en/request-a-quote/?bauart=blatt"]
              },
              {
                "label": "Standard range, socket version",
                "value": "D 1.5–16 mm, L 5, 8 or 12 mm, S 0.1–0.2 mm",
                "source": "Configurator size table",
                "sourceUrls": ["https://www.atlas-contacte.de/en/request-a-quote/?bauart=blatt"]
              },
              {
                "label": "Socket bore",
                "value": "D +0.05",
                "unit": "mm",
                "source": "Leaf spring drawings",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-pin-version-en.pdf"
                ]
              },
              {
                "label": "Pin diameter",
                "value": "D −0.03",
                "unit": "mm",
                "source": "Leaf spring drawings",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-pin-version-en.pdf"
                ]
              },
              {
                "label": "Groove diameter in the socket",
                "value": "D + 0.7 mm (S = 0.2 mm), D + 0.6 mm (S = 0.15 mm), D + 0.5 mm (S = 0.1 mm)",
                "source": "Drawing socket version",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-socket-version-en.pdf"
                ]
              },
              {
                "label": "Groove diameter on the pin",
                "value": "D − 0.7 mm (S = 0.2 mm and 0.17 mm), D − 0.5 mm (S = 0.15 mm)",
                "source": "Drawing pin version",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-pin-version-en.pdf"
                ]
              },
              {
                "label": "Groove width",
                "value": "L +0.25",
                "unit": "mm",
                "source": "Leaf spring drawings",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-pin-version-en.pdf"
                ]
              },
              {
                "label": "Delivery form",
                "value": "pre-rounded to diameter, ready to install",
                "source": "aca-kontaktlamellen.de, leaf spring"
              },
              { "label": "Contact resistance, contact force, insertion force", "value": "on request" },
              {
                "label": "Current rating of the lamella (guide value)",
                "value": "I ≈ k × D (D in mm), nickel-plated. Pin k = 9 / 10.5 / 12 A for S = 0.15 / 0.17 / 0.2 mm, socket k = 6 / 10.5 / 14 A for S = 0.1 / 0.15 / 0.2 mm. Silver- or gold-plated × 1.2"
              },
              { "label": "Temperature range", "value": "on request" },
              { "label": "Mating cycles", "value": "on request" }
            ],
            "note": "Values from the installation drawings and the lamella configurator. Electrical values (contact resistance, contact force, temperature range) are available on request. The current rating is a guide value from the configurator and depends on the installation, so higher or lower values are possible."
          },
          {
            "id": "standardgroessen-stecker",
            "title": "Standard range, pin version",
            "url": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/leaf-spring-contact-band/#standardgroessen-stecker",
            "caption": "Dimensions in mm · L = length · S = material thickness · guide current in A: Ni/Ag, Au",
            "columns": ["L", "S", "Groove Ø", "Groove width", "Guide value A"],
            "rows": [
              { "label": "D 2 mm", "values": ["8", "0.15", "1.5", "8 +0.25", "18/22"] },
              { "label": "D 3 mm", "values": ["8", "0.15", "2.5", "8 +0.25", "27/33"] },
              { "label": "D 4 mm", "values": ["8", "0.17", "3.3", "8 +0.25", "42/51"] },
              { "label": "D 4 mm", "values": ["12", "0.2", "3.3", "12 +0.25", "48/58"] },
              { "label": "D 6 mm", "values": ["12", "0.2", "5.3", "12 +0.25", "72/87"] },
              { "label": "D 8 mm", "values": ["12", "0.2", "7.3", "12 +0.25", "96/120"] }
            ],
            "note": "Material CuBe. Socket bore D +0.05 mm. Groove diameter and width calculated from the installation drawings (D − 0.7 for S = 0.2 and 0.17, D − 0.5 for S = 0.15, groove width L +0.25). Guide value of the current rating of the whole lamella from the lamella configurator, nickel-plated or silver- or gold-plated, rounded as in the configurator: to whole amps below 100 A, to the nearest 10 A from 100 A. Depending on the installation, higher or lower values are possible."
          },
          {
            "id": "standardgroessen-buchse",
            "title": "Standard range, socket version",
            "url": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/leaf-spring-contact-band/#standardgroessen-buchse",
            "caption": "Dimensions in mm · L = length · S = material thickness · guide current in A: Ni/Ag, Au",
            "columns": ["L", "S", "Groove Ø", "Groove width", "Guide value A"],
            "rows": [
              { "label": "D 1.5 mm", "values": ["5", "0.1", "2.0", "5 +0.25", "9/11"] },
              { "label": "D 2 mm", "values": ["5", "0.1", "2.5", "5 +0.25", "12/15"] },
              { "label": "D 3 mm", "values": ["12", "0.2", "3.7", "12 +0.25", "42/51"] },
              { "label": "D 4 mm", "values": ["8", "0.15", "4.6", "8 +0.25", "42/51"] },
              { "label": "D 4 mm", "values": ["12", "0.2", "4.7", "12 +0.25", "56/67"] },
              { "label": "D 5 mm", "values": ["8", "0.15", "5.6", "8 +0.25", "53/63"] },
              { "label": "D 6 mm", "values": ["8", "0.15", "6.6", "8 +0.25", "63/76"] },
              { "label": "D 6 mm", "values": ["8", "0.2", "6.7", "8 +0.25", "84/100"] },
              { "label": "D 8 mm", "values": ["8", "0.2", "8.7", "8 +0.25", "110/130"] },
              { "label": "D 8 mm", "values": ["12", "0.2", "8.7", "12 +0.25", "110/130"] },
              { "label": "D 10 mm", "values": ["8", "0.2", "10.7", "8 +0.25", "140/170"] },
              { "label": "D 10 mm", "values": ["12", "0.2", "10.7", "12 +0.25", "140/170"] },
              { "label": "D 12 mm", "values": ["12", "0.2", "12.7", "12 +0.25", "170/200"] },
              { "label": "D 16 mm", "values": ["8", "0.15", "16.6", "8 +0.25", "170/200"] },
              { "label": "D 16 mm", "values": ["12", "0.2", "16.7", "12 +0.25", "220/270"] }
            ],
            "note": "Material CuBe. Pin diameter D −0.03 mm. Groove diameter and width calculated from the installation drawings (D + 0.7 for S = 0.2, D + 0.6 for S = 0.15, D + 0.5 for S = 0.1, groove width L +0.25). Current guide values from the lamella configurator, as for the pin version and rounded the same way. Other sizes on request."
          }
        ]
      }
    },
    {
      "id": "lam-torsion",
      "bauart": "tors",
      "name": { "de": "Drehfeder-Kontaktband", "en": "Torsion spring contact band" },
      "page": {
        "de": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/drehfeder-kontaktband/",
        "en": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/torsion-spring-contact-band/"
      },
      "markdown": {
        "de": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/drehfeder-kontaktband/index.md",
        "en": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/torsion-spring-contact-band/index.md"
      },
      "configurator": {
        "url": {
          "de": "https://www.atlas-contacte.de/de/anfrage/?bauart=tors",
          "en": "https://www.atlas-contacte.de/en/request-a-quote/?bauart=tors"
        },
        "input": "diameter-or-length",
        "types": ["stecker", "buchse"],
        "surfaces": ["ohne", "silber"],
        "minDiameter": 8,
        "bandWidths": [
          { "bandWidth": 13, "thicknesses": [0.2], "legAngles": [45], "raster": 2 },
          { "bandWidth": 17.5, "thicknesses": [0.15, 0.2, 0.25], "legAngles": [0, 15, 45], "raster": 2.5 }
        ]
      },
      "materials": [
        {
          "part": "lamella",
          "material": {
            "de": "Kupferberyllium (CuBe), ausgehärtet",
            "en": "Beryllium copper (CuBe), age-hardened"
          },
          "designation": "CuBe",
          "finish": {
            "de": "versilbert und passiviert, blank auf Anfrage",
            "en": "silver-plated and passivated, bare on request"
          },
          "source": { "ids": ["ds-tors175-de", "web-kl-tors"], "confidence": "datasheet" }
        }
      ],
      "variants": [
        {
          "id": "lam-torsion-17.5",
          "bandWidth": 17.5,
          "specs": [
            {
              "key": "currentPerWeb",
              "kind": "guide",
              "label": {
                "de": "Strombelastbarkeit je Steg (Richtwert)",
                "en": "Current rating per web (guide value)"
              },
              "unit": "A",
              "per": "web",
              "value": [
                { "s": 0.15, "value": 20 },
                { "s": 0.2, "value": 28 },
                { "s": 0.25, "value": 31 }
              ],
              "condition": {
                "de": "versilbert, blank × 0,8. Gesamtstrom = Anzahl der Stege (Bandlänge ÷ 2,5 mm) × Wert je Steg. Richtwert, abhängig von der Einbausituation",
                "en": "silver-plated, bare × 0.8. Total current = number of webs (band length ÷ 2.5 mm) × value per web. Guide value, depends on the installation"
              },
              "finishFactor": { "silber": 1, "ohne": 0.8 },
              "source": { "ids": ["calc"], "confidence": "configurator" }
            },
            {
              "key": "widthOverLegs",
              "kind": "specification",
              "label": { "de": "Bandbreite über die Beinchen", "en": "Band width over the legs" },
              "value": [
                { "legAngles": [0, 15], "value": 17.5, "tolerance": "±0.3" },
                { "legAngles": [45], "value": 16.9, "tolerance": "±0.3" }
              ],
              "unit": "mm",
              "source": { "ids": ["dwg-tors175-socket", "dwg-tors175-pin"], "confidence": "datasheet" }
            },
            {
              "key": "pitch",
              "kind": "specification",
              "label": { "de": "Teilung (Raster)", "en": "Pitch" },
              "value": 2.5,
              "unit": "mm",
              "source": { "ids": ["web-kl-tors"], "confidence": "datasheet" }
            },
            {
              "key": "thickness",
              "kind": "specification",
              "label": { "de": "Materialdicke S", "en": "Material thickness S" },
              "value": [0.15, 0.2, 0.25],
              "unit": "mm",
              "source": { "ids": ["ds-tors175-de", "calc"], "confidence": "datasheet" }
            },
            {
              "key": "legAngles",
              "kind": "specification",
              "label": { "de": "Beinchenwinkel A", "en": "Leg angle A" },
              "value": [0, 15, 45],
              "unit": "°",
              "source": { "ids": ["calc"], "confidence": "datasheet" }
            },
            {
              "key": "resistancePerWeb",
              "kind": "specification",
              "label": { "de": "Übergangswiderstand je Steg", "en": "Contact resistance per web" },
              "value": [
                { "s": 0.15, "value": 0.55 },
                { "s": 0.2, "value": 0.4 },
                { "s": 0.25, "value": 0.3 }
              ],
              "unit": "mΩ",
              "condition": {
                "de": "Gegenkontakt Kupfer versilbert, Messing versilbert: +40 %",
                "en": "mating contact silver-plated copper, silver-plated brass: +40 %"
              },
              "source": { "ids": ["ds-tors175-de"], "confidence": "datasheet" }
            },
            {
              "key": "brassMatingCurrentFactor",
              "kind": "specification",
              "label": {
                "de": "Stromwerte bei Gegenkontakt aus versilbertem Messing",
                "en": "Current values with silver-plated brass mating contact"
              },
              "value": 0.6,
              "source": { "ids": ["ds-tors175-de", "ds-hc12-de"], "confidence": "datasheet" }
            },
            {
              "key": "frictionCoefficient",
              "kind": "specification",
              "label": {
                "de": "Reibwert zur Abschätzung der Steckkraft",
                "en": "Friction coefficient for the insertion force"
              },
              "value": 0.3,
              "source": { "ids": ["ds-tors175-de"], "confidence": "datasheet" }
            },
            {
              "key": "temperatureRange",
              "kind": "specification",
              "label": { "de": "Temperaturbereich", "en": "Temperature range" },
              "value": { "min": -40, "max": 180 },
              "unit": "°C",
              "source": { "ids": ["ds-tors175-de"], "confidence": "datasheet" }
            },
            {
              "key": "socketVersion.bore",
              "kind": "specification",
              "label": { "de": "Buchsenausführung: Bohrung", "en": "Socket version: bore" },
              "value": "D +0.05",
              "unit": "mm",
              "source": { "ids": ["ds-tors175-de", "dwg-tors175-socket"], "confidence": "datasheet" }
            },
            {
              "key": "socketVersion.grooveDiameter",
              "kind": "specification",
              "label": {
                "de": "Buchsenausführung: Nutdurchmesser in der Buchse",
                "en": "Socket version: groove diameter in the socket"
              },
              "value": "D + 1.6",
              "unit": "mm",
              "source": { "ids": ["ds-tors175-de", "dwg-tors175-socket"], "confidence": "datasheet" }
            },
            {
              "key": "socketVersion.grooveWidth",
              "kind": "specification",
              "label": { "de": "Nutbreite", "en": "Groove width" },
              "value": [
                { "legAngles": [0, 15], "value": 17.9 },
                { "legAngles": [45], "value": 17.3 }
              ],
              "unit": "mm",
              "source": { "ids": ["ds-tors175-de", "dwg-tors175-socket"], "confidence": "datasheet" }
            },
            {
              "key": "socketVersion.pinDiameter",
              "kind": "specification",
              "label": { "de": "Buchsenausführung: Stiftdurchmesser", "en": "Socket version: pin diameter" },
              "value": "D −0.03",
              "unit": "mm",
              "source": { "ids": ["ds-tors175-de", "dwg-tors175-socket"], "confidence": "datasheet" }
            },
            {
              "key": "pinVersion.grooveDiameter",
              "kind": "specification",
              "label": {
                "de": "Steckerausführung: Nutdurchmesser im Stift",
                "en": "Pin version: groove diameter in the pin"
              },
              "value": "D − 1.6",
              "unit": "mm",
              "source": { "ids": ["ds-tors175-de", "dwg-tors175-pin"], "confidence": "datasheet" }
            },
            {
              "key": "generalTolerance",
              "kind": "specification",
              "label": {
                "de": "Allgemeintoleranz der Zeichnungen",
                "en": "General tolerance of the drawings"
              },
              "value": "ISO 2768-m",
              "source": { "ids": ["dwg-tors175-socket"], "confidence": "datasheet" }
            }
          ]
        },
        {
          "id": "lam-torsion-13",
          "bandWidth": 13,
          "specs": [
            {
              "key": "currentPerWeb",
              "kind": "guide",
              "label": {
                "de": "Strombelastbarkeit je Steg (Richtwert)",
                "en": "Current rating per web (guide value)"
              },
              "unit": "A",
              "per": "web",
              "value": 25,
              "condition": {
                "de": "versilbert, blank × 0,8. Gesamtstrom = Anzahl der Stege (Bandlänge ÷ 2,0 mm) × Wert je Steg. Richtwert, abhängig von der Einbausituation",
                "en": "silver-plated, bare × 0.8. Total current = number of webs (band length ÷ 2.0 mm) × value per web. Guide value, depends on the installation"
              },
              "finishFactor": { "silber": 1, "ohne": 0.8 },
              "source": { "ids": ["calc"], "confidence": "configurator" }
            },
            {
              "key": "flatWidth",
              "kind": "specification",
              "label": { "de": "Breite (flach)", "en": "Width (flat)" },
              "value": 12.9,
              "unit": "mm",
              "source": { "ids": ["dwg-tors13"], "confidence": "datasheet" }
            },
            {
              "key": "pitch",
              "kind": "specification",
              "label": { "de": "Teilung (Raster)", "en": "Pitch" },
              "value": 2,
              "unit": "mm",
              "source": { "ids": ["dwg-tors13", "web-kl-tors"], "confidence": "datasheet" }
            },
            {
              "key": "unloadedHeight",
              "kind": "specification",
              "label": { "de": "Höhe ungespannt", "en": "Unloaded height" },
              "value": 1.8,
              "unit": "mm",
              "source": { "ids": ["dwg-tors13"], "confidence": "datasheet" }
            },
            {
              "key": "socketVersion.bore",
              "kind": "specification",
              "label": { "de": "Bohrung", "en": "Bore" },
              "value": "D +0.05",
              "unit": "mm",
              "source": { "ids": ["dwg-tors13"], "confidence": "datasheet" }
            },
            {
              "key": "socketVersion.grooveDiameter",
              "kind": "specification",
              "label": { "de": "Nutdurchmesser in der Buchse", "en": "Groove diameter in the socket" },
              "value": "D + 2.0",
              "unit": "mm",
              "source": { "ids": ["dwg-tors13"], "confidence": "datasheet" }
            },
            {
              "key": "socketVersion.grooveWidth",
              "kind": "specification",
              "label": { "de": "Nutbreite", "en": "Groove width" },
              "value": 13.2,
              "unit": "mm",
              "source": { "ids": ["dwg-tors13"], "confidence": "datasheet" }
            },
            {
              "key": "socketVersion.pinDiameter",
              "kind": "specification",
              "label": { "de": "Stiftdurchmesser", "en": "Pin diameter" },
              "value": "D −0.03",
              "unit": "mm",
              "source": { "ids": ["dwg-tors13"], "confidence": "datasheet" }
            }
          ]
        }
      ],
      "specTables": {
        "de": [
          {
            "id": "technische-daten",
            "title": "Technische Daten Drehfeder-Kontaktband 13 und 17,5 mm",
            "url": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/drehfeder-kontaktband/#technische-daten",
            "columns": ["13 mm", "17,5 mm"],
            "rows": [
              {
                "label": "Steckdurchmesser D",
                "value": "ab 8 mm",
                "source": "aca-kontaktlamellen.de, Drehfeder (web-kl-home, web-kl-tors)"
              },
              {
                "label": "Einbau",
                "values": [
                  "Buchsenausführung (Steckerausführung auf Anfrage)",
                  "Buchsen- oder Steckerausführung, ab 20 mm Steckdurchmesser Buchse empfohlen"
                ],
                "source": "13: Zeichnung Drehfederband 13. 17,5: Zeichnungen 17,5, aca-kontaktlamellen.de Drehfeder",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Werkstoff",
                "value": "Kupferberyllium (CuBe), relaxationsbeständig",
                "source": "Zeichnung Drehfederband 13 (CuBe), Datenblatt 17,5 mm S. 3",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-drehfeder-kontaktband-17-5mm-de.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Oberfläche",
                "values": ["versilbert oder blank", "versilbert und passiviert, alternativ blank"],
                "source": "13: Zeichnung Drehfederband 13 (versilbert), Konfigurator (ohne Oberfläche). 17,5: Datenblatt S. 3, Zeichnungen 17,5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-drehfeder-kontaktband-17-5mm-de.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf",
                  "https://www.atlas-contacte.de/de/anfrage/?bauart=tors"
                ]
              },
              { "label": "Silberschichtdicke", "value": "auf Anfrage" },
              {
                "label": "Bandbreite",
                "values": [
                  "12,9 mm flach",
                  "17,5 ± 0,3 mm über die Beinchen (A = 0°/15°), 16,9 ± 0,3 mm (A = 45°)"
                ],
                "source": "Zeichnung Drehfederband 13, Zeichnungen Buchsen- und Steckerausführung 17,5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Teilung (Raster)",
                "values": ["2,0", "2,5"],
                "unit": "mm",
                "source": "Zeichnung Drehfederband 13, Zeichnungen 17,5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Höhe ungespannt",
                "values": ["1,8", "auf Anfrage"],
                "unit": "mm",
                "source": "Zeichnung Drehfederband 13. 17,5: nicht gedruckt (nur aus dem Kraftdiagramm abgelesen)",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Materialdicke S",
                "values": ["0,2", "0,15 / 0,2 / 0,25"],
                "unit": "mm",
                "source": "13: Konfigurator. 17,5: Datenblatt S. 4/5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-drehfeder-kontaktband-17-5mm-de.pdf",
                  "https://www.atlas-contacte.de/de/anfrage/?bauart=tors"
                ]
              },
              {
                "label": "Beinchenwinkel A",
                "values": ["45°", "0° / 15° / 45°"],
                "source": "13: Konfigurator. 17,5: Zeichnungen 17,5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf",
                  "https://www.atlas-contacte.de/de/anfrage/?bauart=tors"
                ]
              },
              {
                "label": "Übergangswiderstand je Steg",
                "values": [
                  "auf Anfrage",
                  "0,55 mΩ (S = 0,15 mm) / 0,40 mΩ (S = 0,2 mm) / 0,30 mΩ (S = 0,25 mm)"
                ],
                "source": "Datenblatt 17,5 mm S. 5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-drehfeder-kontaktband-17-5mm-de.pdf"
                ]
              },
              {
                "label": "Strombelastbarkeit je Steg (Richtwert)",
                "values": [
                  "25 A, versilbert, blank × 0,8",
                  "20 A (S = 0,15 mm) / 28 A (S = 0,2 mm) / 31 A (S = 0,25 mm), versilbert, blank × 0,8"
                ],
                "source": "Lamellen-Konfigurator",
                "sourceUrls": ["https://www.atlas-contacte.de/de/anfrage/?bauart=tors"]
              },
              {
                "label": "Gegenkontakt aus versilbertem Messing",
                "values": ["auf Anfrage", "Widerstand +40 %, Stromwerte × 0,6"],
                "source": "Datenblatt 17,5 mm S. 4/5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-drehfeder-kontaktband-17-5mm-de.pdf"
                ]
              },
              {
                "label": "Reibwert zur Abschätzung der Steckkraft",
                "values": ["auf Anfrage", "ca. 0,3"],
                "source": "Datenblatt 17,5 mm S. 5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-drehfeder-kontaktband-17-5mm-de.pdf"
                ]
              },
              {
                "label": "Temperaturbereich",
                "values": ["auf Anfrage", "−40 °C bis +180 °C"],
                "source": "Datenblatt 17,5 mm S. 2",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-drehfeder-kontaktband-17-5mm-de.pdf"
                ]
              },
              {
                "label": "Kurzschlussstromfestigkeit",
                "values": ["auf Anfrage", "hoch, Zahlenwert auf Anfrage"],
                "source": "Datenblatt 17,5 mm S. 2",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-drehfeder-kontaktband-17-5mm-de.pdf"
                ]
              },
              { "label": "Steckzyklen", "value": "auf Anfrage" },
              {
                "label": "Lieferform",
                "value": "vorgerundet einbaufertig oder flach abgelängter Bandabschnitt",
                "source": "aca-kontaktlamellen.de Drehfeder (web-kl-tors, beide Bandbreiten), Datenblatt 17,5 mm S. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-drehfeder-kontaktband-17-5mm-de.pdf"
                ]
              },
              {
                "label": "Allgemeintoleranz der Zeichnungen",
                "values": ["auf Anfrage", "ISO 2768-m"],
                "source": "Zeichnungen 17,5 (die Zeichnung 13 nennt keine)",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf"
                ]
              }
            ],
            "note": "Werte aus dem Datenblatt 17,5 mm und den Einbauzeichnungen beider Bandbreiten, Richtwerte der Strombelastbarkeit aus dem Lamellen-Konfigurator. Widerstände gelten für Gegenkontakte aus versilbertem Kupfer unter idealen Bedingungen. Die Strombelastbarkeit hängt von der Einbausituation ab, je nach Einbau sind höhere wie niedrigere Werte möglich. Prüfen Sie den Wert in der Anwendung durch Messung."
          },
          {
            "id": "einbaumasse",
            "title": "Einbaumaße für Buchse und Stecker",
            "url": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/drehfeder-kontaktband/#einbaumasse",
            "columns": ["13 mm", "17,5 mm"],
            "rows": [
              {
                "label": "Buchsenausführung: Bohrung",
                "value": "D +0,05",
                "unit": "mm",
                "source": "Zeichnung Drehfederband 13, Zeichnung Buchsenausführung 17,5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf"
                ]
              },
              {
                "label": "Buchsenausführung: Nutdurchmesser in der Buchse",
                "values": ["D + 2,0", "D + 1,6"],
                "unit": "mm",
                "source": "Zeichnung Drehfederband 13, Zeichnung Buchsenausführung 17,5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf"
                ]
              },
              {
                "label": "Buchsenausführung: Stiftdurchmesser",
                "value": "D −0,03",
                "unit": "mm",
                "source": "Zeichnung Drehfederband 13, Zeichnung Buchsenausführung 17,5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf"
                ]
              },
              {
                "label": "Steckerausführung: Bohrung der Buchse",
                "values": ["auf Anfrage", "D +0,05"],
                "unit": "mm",
                "source": "Zeichnung Steckerausführung 17,5. 13: Steckereinbau auf Anfrage (Zeichnung Drehfederband 13)",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Steckerausführung: Nutdurchmesser im Stift",
                "values": ["auf Anfrage", "D − 1,6"],
                "unit": "mm",
                "source": "Zeichnung Steckerausführung 17,5. 13: Steckereinbau auf Anfrage",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Steckerausführung: Stiftdurchmesser",
                "values": ["auf Anfrage", "D −0,03"],
                "unit": "mm",
                "source": "Zeichnung Steckerausführung 17,5. 13: Steckereinbau auf Anfrage",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf"
                ]
              },
              {
                "label": "Nutbreite",
                "values": ["13,2 mm", "17,9 mm (A = 0°/15°), 17,3 mm (A = 45°)"],
                "source": "Zeichnung Drehfederband 13, Zeichnungen 17,5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf"
                ]
              }
            ],
            "note": "Maße nach den Einbauzeichnungen: Buchsen- und Steckerausführung 17,5 mm, Buchsenausführung 13 mm. D ist der Steckdurchmesser. Rechnerisch ergibt die Nut eine radiale Einbauhöhe von etwa 1,0 mm beim 13-mm-Band und 0,8 mm beim 17,5-mm-Band. Die Zeichnung zeigt die Nuten des 17,5-mm-Bands."
          }
        ],
        "en": [
          {
            "id": "technische-daten",
            "title": "Technical data: torsion spring contact band 13 and 17.5 mm",
            "url": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/torsion-spring-contact-band/#technische-daten",
            "columns": ["13 mm", "17.5 mm"],
            "rows": [
              {
                "label": "Mating diameter D",
                "value": "from 8 mm",
                "source": "aca-kontaktlamellen.de, torsion spring (web-kl-home, web-kl-tors)"
              },
              {
                "label": "Installation",
                "values": [
                  "socket version (pin version on request)",
                  "socket or pin version, socket recommended from 20 mm mating diameter"
                ],
                "source": "13: drawing torsion band 13. 17.5: 17.5 drawings, aca-kontaktlamellen.de torsion spring",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
                ]
              },
              {
                "label": "Material",
                "value": "Beryllium copper (CuBe), relaxation-resistant",
                "source": "Drawing torsion band 13 (CuBe), datasheet 17.5 mm p. 3",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
                ]
              },
              {
                "label": "Finish",
                "values": ["silver-plated or bare", "silver-plated and passivated, bare as an option"],
                "source": "13: drawing torsion band 13, configurator. 17.5: datasheet p. 3, 17.5 drawings",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf",
                  "https://www.atlas-contacte.de/en/request-a-quote/?bauart=tors"
                ]
              },
              { "label": "Silver thickness", "value": "on request" },
              {
                "label": "Band width",
                "values": [
                  "12.9 mm flat",
                  "17.5 ± 0.3 mm over the legs (A = 0°/15°), 16.9 ± 0.3 mm (A = 45°)"
                ],
                "source": "Drawing torsion band 13, drawings socket and pin version 17.5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
                ]
              },
              {
                "label": "Louver pitch",
                "values": ["2.0", "2.5"],
                "unit": "mm",
                "source": "Drawing torsion band 13, 17.5 drawings",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
                ]
              },
              {
                "label": "Unloaded height",
                "values": ["1.8", "on request"],
                "unit": "mm",
                "source": "Drawing torsion band 13. 17.5: not printed (chart reading only)",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
                ]
              },
              {
                "label": "Material thickness S",
                "values": ["0.2", "0.15 / 0.2 / 0.25"],
                "unit": "mm",
                "source": "13: configurator. 17.5: datasheet p. 4/5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf",
                  "https://www.atlas-contacte.de/en/request-a-quote/?bauart=tors"
                ]
              },
              {
                "label": "Leg angle A",
                "values": ["45°", "0° / 15° / 45°"],
                "source": "13: configurator. 17.5: 17.5 drawings",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf",
                  "https://www.atlas-contacte.de/en/request-a-quote/?bauart=tors"
                ]
              },
              {
                "label": "Contact resistance per louver",
                "values": [
                  "on request",
                  "0.55 mΩ (S = 0.15 mm) / 0.40 mΩ (S = 0.2 mm) / 0.30 mΩ (S = 0.25 mm)"
                ],
                "source": "Datasheet 17.5 mm p. 5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf"
                ]
              },
              {
                "label": "Current rating per louver (guide value)",
                "values": [
                  "25 A, silver-plated, bare × 0.8",
                  "20 A (S = 0.15 mm) / 28 A (S = 0.2 mm) / 31 A (S = 0.25 mm), silver-plated, bare × 0.8"
                ],
                "source": "Lamella configurator",
                "sourceUrls": ["https://www.atlas-contacte.de/en/request-a-quote/?bauart=tors"]
              },
              {
                "label": "Mating contact in silver-plated brass",
                "values": ["on request", "resistance +40 %, current values × 0.6"],
                "source": "Datasheet 17.5 mm p. 4/5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf"
                ]
              },
              {
                "label": "Friction coefficient for insertion force",
                "values": ["on request", "approx. 0.3"],
                "source": "Datasheet 17.5 mm p. 5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf"
                ]
              },
              {
                "label": "Temperature range",
                "values": ["on request", "−40 °C to +180 °C"],
                "source": "Datasheet 17.5 mm p. 2",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf"
                ]
              },
              {
                "label": "Short-circuit withstand capability",
                "values": ["on request", "high, figure on request"],
                "source": "Datasheet 17.5 mm p. 2",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf"
                ]
              },
              { "label": "Mating cycles", "value": "on request" },
              {
                "label": "Delivery form",
                "value": "pre-rounded ready to install, or flat strip section cut to length",
                "source": "aca-kontaktlamellen.de torsion spring (web-kl-tors, both widths), datasheet 17.5 mm p. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf"
                ]
              },
              {
                "label": "General tolerance of the drawings",
                "values": ["on request", "ISO 2768-m"],
                "source": "17.5 drawings (the 13 drawing gives none)",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
                ]
              }
            ],
            "note": "Values from the 17.5 mm datasheet and the installation drawings of both widths, current rating guide values from the lamella configurator. Resistances apply to mating contacts in silver-plated copper under ideal conditions. The current rating depends on the installation, so higher or lower values are possible. Verify the value by measurement in the application."
          },
          {
            "id": "einbaumasse",
            "title": "Installation dimensions for socket and pin",
            "url": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/torsion-spring-contact-band/#einbaumasse",
            "columns": ["13 mm", "17.5 mm"],
            "rows": [
              {
                "label": "Socket version: bore",
                "value": "D +0.05",
                "unit": "mm",
                "source": "Drawing torsion band 13, drawing socket version 17.5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf"
                ]
              },
              {
                "label": "Socket version: groove diameter in the socket",
                "values": ["D + 2.0", "D + 1.6"],
                "unit": "mm",
                "source": "Drawing torsion band 13, drawing socket version 17.5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf"
                ]
              },
              {
                "label": "Socket version: pin diameter",
                "value": "D −0.03",
                "unit": "mm",
                "source": "Drawing torsion band 13, drawing socket version 17.5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf"
                ]
              },
              {
                "label": "Pin version: socket bore",
                "values": ["on request", "D +0.05"],
                "unit": "mm",
                "source": "Drawing pin version 17.5. 13: pin mounting on request",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
                ]
              },
              {
                "label": "Pin version: groove diameter on the pin",
                "values": ["on request", "D − 1.6"],
                "unit": "mm",
                "source": "Drawing pin version 17.5. 13: pin mounting on request",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
                ]
              },
              {
                "label": "Pin version: pin diameter",
                "values": ["on request", "D −0.03"],
                "unit": "mm",
                "source": "Drawing pin version 17.5. 13: pin mounting on request",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
                ]
              },
              {
                "label": "Groove width",
                "values": ["13.2 mm", "17.9 mm (A = 0°/15°), 17.3 mm (A = 45°)"],
                "source": "Drawing torsion band 13, 17.5 drawings",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
                ]
              }
            ],
            "note": "Dimensions from the installation drawings: socket and pin version 17.5 mm, socket version 13 mm. D is the mating diameter. By calculation, the groove gives a radial installation height of about 1.0 mm for the 13 mm band and 0.8 mm for the 17.5 mm band. The drawing shows the grooves of the 17.5 mm band."
          }
        ]
      }
    },
    {
      "id": "lam-highcurrent",
      "bauart": "band",
      "name": { "de": "Hochstrom-Kontaktband", "en": "High-current contact band" },
      "page": {
        "de": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/hochstrom-kontaktband/",
        "en": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/high-current-contact-band/"
      },
      "markdown": {
        "de": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/hochstrom-kontaktband/index.md",
        "en": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/high-current-contact-band/index.md"
      },
      "configurator": {
        "url": {
          "de": "https://www.atlas-contacte.de/de/anfrage/?bauart=band",
          "en": "https://www.atlas-contacte.de/en/request-a-quote/?bauart=band"
        },
        "input": "diameter-or-length",
        "surfaces": ["silber"],
        "minDiameter": 20,
        "raster": 3.5
      },
      "materials": [
        {
          "part": "carrier",
          "material": { "de": "rostfreier Federstahl (Edelstahl)", "en": "stainless spring steel" },
          "finish": { "de": "ohne Beschichtung", "en": "not plated" },
          "source": { "ids": ["ds-hc12-de", "dwg-hc12", "web-kl-hc"], "confidence": "datasheet" }
        },
        {
          "part": "contactPieces",
          "material": {
            "de": "hochleitfähiges Kupfer, aufgenietet",
            "en": "high-conductivity copper, riveted on"
          },
          "designation": "Cu",
          "finish": { "de": "versilbert und passiviert", "en": "silver-plated and passivated" },
          "source": { "ids": ["ds-hc12-de", "dwg-hc12", "web-kl-hc"], "confidence": "datasheet" }
        }
      ],
      "specs": [
        {
          "key": "width",
          "kind": "specification",
          "label": { "de": "Bandbreite", "en": "Band width" },
          "value": 12,
          "unit": "mm",
          "source": { "ids": ["dwg-hc12", "web-kl-hc"], "confidence": "datasheet" }
        },
        {
          "key": "pitch",
          "kind": "specification",
          "label": { "de": "Raster", "en": "Pitch" },
          "value": 3.5,
          "unit": "mm",
          "source": { "ids": ["dwg-hc12", "web-kl-hc"], "confidence": "datasheet" }
        },
        {
          "key": "contactPieceThickness",
          "kind": "specification",
          "label": { "de": "Dicke der Kupfer-Kontaktstücke", "en": "Thickness of the copper contact pieces" },
          "value": 0.6,
          "unit": "mm",
          "source": { "ids": ["web-kl-hc"], "confidence": "web" }
        },
        {
          "key": "silverThickness",
          "kind": "specification",
          "label": { "de": "Silberschichtdicke (Standard)", "en": "Silver thickness (standard)" },
          "value": 20,
          "unit": "µm",
          "source": { "ids": ["web-kl-hc"], "confidence": "web" }
        },
        {
          "key": "unloadedHeight",
          "kind": "specification",
          "label": { "de": "Höhe ungespannt", "en": "Unloaded height" },
          "value": 2.5,
          "unit": "mm",
          "source": { "ids": ["dwg-hc12"], "confidence": "datasheet" }
        },
        {
          "key": "workingHeight",
          "kind": "specification",
          "label": {
            "de": "Radiale Einbauhöhe (Arbeitsbereich)",
            "en": "Radial installation height (working range)"
          },
          "value": { "min": 1.5, "max": 2, "idealMin": 1.6, "idealMax": 1.8 },
          "unit": "mm",
          "source": { "ids": ["ds-hc12-de", "dwg-hc12", "web-kl-hc"], "confidence": "datasheet" }
        },
        {
          "key": "resistancePerWeb",
          "kind": "specification",
          "label": { "de": "Übergangswiderstand je Steg", "en": "Contact resistance per web" },
          "value": { "silverPlatedCopper": 0.5, "silverPlatedBrass": 0.7 },
          "unit": "mΩ",
          "source": { "ids": ["ds-hc12-de"], "confidence": "datasheet" }
        },
        {
          "key": "contactForcePerWeb",
          "kind": "specification",
          "label": { "de": "Kontaktkraft je Steg", "en": "Contact force per web" },
          "value": { "approx": 6, "atHeight": 1.5 },
          "unit": "N",
          "condition": {
            "de": "ca. 6 N bei 1,5 mm Einbauhöhe",
            "en": "approx. 6 N at 1.5 mm installation height"
          },
          "source": { "ids": ["ds-hc12-de", "web-kl-hc"], "confidence": "datasheet" }
        },
        {
          "key": "ratedCurrentPerWeb",
          "kind": "guide",
          "label": { "de": "Nennstrom je Steg (Richtwert)", "en": "Rated current per web (guide value)" },
          "value": { "greaterThan": 40 },
          "unit": "A",
          "condition": {
            "de": "Richtwert, anwendungsabhängig, im Einsatzfall prüfen",
            "en": "guide value, depends on the application, verify in use"
          },
          "source": { "ids": ["ds-hc12-2012", "web-kl-hc"], "confidence": "web" },
          "per": "web"
        },
        {
          "key": "brassMatingCurrentFactor",
          "kind": "specification",
          "label": {
            "de": "Stromwerte bei Gegenkontakt aus versilbertem Messing",
            "en": "Current values with silver-plated brass mating contact"
          },
          "value": 0.6,
          "source": { "ids": ["ds-tors175-de", "ds-hc12-de"], "confidence": "datasheet" }
        },
        {
          "key": "roundContact.groove",
          "kind": "specification",
          "label": { "de": "Rundkontakt: Nut", "en": "Round contact: groove" },
          "value": { "radialDepth": 1.6, "width": 12.3 },
          "unit": "mm",
          "source": { "ids": ["ds-hc12-de"], "confidence": "datasheet" }
        },
        {
          "key": "flatContact.groove",
          "kind": "specification",
          "label": { "de": "Flachkontakt: hinterschnittene Nut", "en": "Flat contact: undercut groove" },
          "value": {
            "opening": 9.1,
            "openingTolerance": "+0.2",
            "width": 12.3,
            "widthTolerance": "+0.2",
            "totalDepth": 1.5,
            "undercutHeight": 1.2
          },
          "unit": "mm",
          "source": { "ids": ["ds-hc12-de"], "confidence": "datasheet" }
        },
        {
          "key": "frictionCoefficient",
          "kind": "specification",
          "label": {
            "de": "Reibwert zur Abschätzung der Steckkraft",
            "en": "Friction coefficient for the insertion force"
          },
          "value": { "min": 0.4, "max": 0.6 },
          "source": { "ids": ["ds-hc12-de"], "confidence": "datasheet" }
        },
        {
          "key": "temperatureRange",
          "kind": "specification",
          "label": { "de": "Temperaturbereich", "en": "Temperature range" },
          "value": { "min": -40, "max": 150 },
          "unit": "°C",
          "source": { "ids": ["ds-hc12-de"], "confidence": "datasheet" }
        }
      ],
      "specTables": {
        "de": [
          {
            "id": "technische-daten",
            "title": "Technische Daten Hochstrom-Kontaktband 12 mm",
            "url": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/hochstrom-kontaktband/#technische-daten",
            "rows": [
              {
                "label": "Nennstrom je Steg",
                "value": "über 40 A (Richtwert, anwendungsabhängig, im Einsatzfall prüfen)",
                "source": "aca-kontaktlamellen.de, Hochstromkontaktband"
              },
              {
                "label": "Übergangswiderstand je Steg",
                "value": "0,50 mΩ (Gegenkontakt Cu versilbert), 0,70 mΩ (Messing versilbert)",
                "source": "Datenblatt S. 4",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Kontaktkraft je Steg",
                "value": "ca. 6 N bei 1,5 mm Einbauhöhe",
                "source": "Datenblatt S. 5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Gegenkontakt aus versilbertem Messing",
                "value": "Stromwerte × 0,6",
                "source": "Datenblatt S. 4",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Trägerband",
                "value": "nichtrostender Federstahl",
                "source": "Datenblatt Hochstromkontaktband 12 mm, S. 3",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Kontaktstücke",
                "value": "Kupfer, versilbert, gleitfähig passiviert, aufgenietet",
                "source": "Datenblatt S. 3, Zeichnung",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-hochstrom-kontaktband-12mm.pdf"
                ]
              },
              {
                "label": "Oberfläche und Silberschichtdicke",
                "value": "nur Silber, 20 µm Standard, anwendungsspezifisch wählbar",
                "source": "Konfigurator, aca-kontaktlamellen.de Hochstromkontaktband",
                "sourceUrls": ["https://www.atlas-contacte.de/de/anfrage/?bauart=band"]
              },
              {
                "label": "Bandbreite",
                "value": "12",
                "unit": "mm",
                "source": "Zeichnung",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-hochstrom-kontaktband-12mm.pdf"
                ]
              },
              {
                "label": "Raster",
                "value": "3,5",
                "unit": "mm",
                "source": "Zeichnung",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-hochstrom-kontaktband-12mm.pdf"
                ]
              },
              {
                "label": "Dicke der Kupfer-Kontaktstücke",
                "value": "0,6",
                "unit": "mm",
                "source": "aca-kontaktlamellen.de, Hochstromkontaktband"
              },
              {
                "label": "Höhe ungespannt",
                "value": "2,5",
                "unit": "mm",
                "source": "Zeichnung",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-hochstrom-kontaktband-12mm.pdf"
                ]
              },
              {
                "label": "Radiale Einbauhöhe (Arbeitsbereich)",
                "value": "1,5–2,0 mm, ideal 1,6–1,8 mm",
                "source": "Zeichnung, Datenblatt S. 5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-hochstrom-kontaktband-12mm.pdf"
                ]
              },
              {
                "label": "Reibwert zur Abschätzung der Steckkraft",
                "value": "0,4–0,6, mit Kontaktschmierstoff geringer",
                "source": "Datenblatt S. 5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Temperaturbereich",
                "value": "−40 °C bis +150 °C",
                "source": "Datenblatt S. 2",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Kurzschlussstromfestigkeit",
                "value": "sehr hoch, Zahlenwert auf Anfrage",
                "source": "aca-kontaktlamellen.de, Hochstromkontaktband"
              },
              { "label": "Steckzyklen", "value": "auf Anfrage" },
              {
                "label": "Steckdurchmesser D",
                "value": "ab 20 mm",
                "source": "Konfigurator",
                "sourceUrls": ["https://www.atlas-contacte.de/de/anfrage/?bauart=band"]
              },
              {
                "label": "Lieferform",
                "value": "Meterware oder Bandstück mit definierter Kontaktzahl",
                "source": "Datenblatt S. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              }
            ],
            "note": "Werte aus Datenblatt, Zeichnung und Produktseite. Widerstände gelten für Gegenkontakte aus versilbertem Kupfer unter idealen Bedingungen mit ausreichend dimensionierten Leitern. Der Nennstrom ist anwendungsabhängig und im Einsatzfall zu prüfen."
          },
          {
            "id": "einbaumasse",
            "title": "Nutmaße für Rund- und Flachkontakte",
            "url": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/hochstrom-kontaktband/#einbaumasse",
            "rows": [
              {
                "label": "Rundkontakt: Einbau",
                "value": "bevorzugt in der Buchse, in eingedrehter Nut unter eigener Vorspannung",
                "source": "Datenblatt S. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Rundkontakt: radiale Nuttiefe",
                "value": "1,6",
                "unit": "mm",
                "source": "Datenblatt S. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Rundkontakt: Nutbreite",
                "value": "12,3",
                "unit": "mm",
                "source": "Datenblatt S. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Flachkontakt: Nutöffnung",
                "value": "9,1 +0,2",
                "unit": "mm",
                "source": "Datenblatt S. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Flachkontakt: Nutbreite",
                "value": "12,3 +0,2",
                "unit": "mm",
                "source": "Datenblatt S. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Flachkontakt: Nuttiefe gesamt",
                "value": "1,5",
                "unit": "mm",
                "source": "Datenblatt S. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              },
              {
                "label": "Flachkontakt: Höhe der Hinterschneidung",
                "value": "1,2",
                "unit": "mm",
                "source": "Datenblatt S. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf"
                ]
              }
            ],
            "note": "Maße nach Datenblatt S. 6. Große Durchmesser können eine zusätzliche Befestigung erfordern. Je nach Anwendung sind weitere Befestigungsarten möglich."
          }
        ],
        "en": [
          {
            "id": "technische-daten",
            "title": "Technical data: high-current contact band 12 mm",
            "url": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/high-current-contact-band/#technische-daten",
            "rows": [
              {
                "label": "Rated current per contact",
                "value": "over 40 A (guide value, depends on the application, verify in service)",
                "source": "aca-kontaktlamellen.de, high-current contact band"
              },
              {
                "label": "Contact resistance per contact",
                "value": "0.50 mΩ (mating contact Cu silver-plated), 0.70 mΩ (brass silver-plated)",
                "source": "Datasheet p. 4",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Contact force per contact",
                "value": "approx. 6 N at 1.5 mm installation height",
                "source": "Datasheet p. 5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Mating contact in silver-plated brass",
                "value": "current values × 0.6",
                "source": "Datasheet p. 4",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Carrier strip",
                "value": "stainless spring steel",
                "source": "Datasheet high-current contact band 12 mm, p. 3",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Contact pieces",
                "value": "copper, silver-plated, passivated for easy sliding, riveted",
                "source": "Datasheet p. 3, drawing",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Finish and silver thickness",
                "value": "silver only, 20 µm as standard, chosen to suit the application",
                "source": "Configurator, aca-kontaktlamellen.de high-current contact band",
                "sourceUrls": ["https://www.atlas-contacte.de/en/request-a-quote/?bauart=band"]
              },
              {
                "label": "Band width",
                "value": "12",
                "unit": "mm",
                "source": "Drawing",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Pitch",
                "value": "3.5",
                "unit": "mm",
                "source": "Drawing",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Thickness of copper contact pieces",
                "value": "0.6",
                "unit": "mm",
                "source": "aca-kontaktlamellen.de, high-current contact band"
              },
              {
                "label": "Unloaded height",
                "value": "2.5",
                "unit": "mm",
                "source": "Drawing",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Radial installation height (working range)",
                "value": "1.5–2.0 mm, ideally 1.6–1.8 mm",
                "source": "Drawing, datasheet p. 5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf",
                  "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Friction coefficient for insertion force",
                "value": "0.4–0.6, lower with contact lubricant",
                "source": "Datasheet p. 5",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Temperature range",
                "value": "−40 °C to +150 °C",
                "source": "Datasheet p. 2",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Short-circuit withstand capability",
                "value": "very high, figure on request",
                "source": "aca-kontaktlamellen.de, high-current contact band"
              },
              { "label": "Mating cycles", "value": "on request" },
              {
                "label": "Mating diameter D",
                "value": "from 20 mm",
                "source": "Configurator",
                "sourceUrls": ["https://www.atlas-contacte.de/en/request-a-quote/?bauart=band"]
              },
              {
                "label": "Delivery form",
                "value": "by the metre or as pieces with a defined number of contacts",
                "source": "Datasheet p. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              }
            ],
            "note": "Values from the datasheet, drawing and product page. Resistances apply to mating contacts in silver-plated copper under ideal conditions with adequately sized conductors. The rated current depends on the application and must be verified in service."
          },
          {
            "id": "einbaumasse",
            "title": "Groove dimensions for round and flat contacts",
            "url": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/high-current-contact-band/#einbaumasse",
            "rows": [
              {
                "label": "Round contact: installation",
                "value": "preferably in the socket, in a turned groove, held by its own preload",
                "source": "Datasheet p. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Round contact: radial groove depth",
                "value": "1.6",
                "unit": "mm",
                "source": "Datasheet p. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Round contact: groove width",
                "value": "12.3",
                "unit": "mm",
                "source": "Datasheet p. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Flat contact: slot opening",
                "value": "9.1 +0.2",
                "unit": "mm",
                "source": "Datasheet p. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Flat contact: groove width",
                "value": "12.3 +0.2",
                "unit": "mm",
                "source": "Datasheet p. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Flat contact: total groove depth",
                "value": "1.5",
                "unit": "mm",
                "source": "Datasheet p. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              },
              {
                "label": "Flat contact: undercut height",
                "value": "1.2",
                "unit": "mm",
                "source": "Datasheet p. 6",
                "sourceUrls": [
                  "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
                ]
              }
            ],
            "note": "Dimensions from datasheet p. 6. Large diameters may need additional fixing. Further fixing methods are possible depending on the application."
          }
        ]
      }
    }
  ],
  "sources": {
    "ds-tors175-de": {
      "type": "datasheet",
      "label": {
        "de": "Datenblatt Drehfeder-Kontaktband 17,5 mm",
        "en": "Datasheet torsion spring contact band 17.5 mm"
      },
      "url": {
        "de": "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-drehfeder-kontaktband-17-5mm-de.pdf",
        "en": "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf"
      }
    },
    "dwg-tors175-socket": {
      "type": "drawing",
      "label": {
        "de": "Einbauzeichnung Drehfeder-Kontaktband 17,5 mm, Buchsenausführung",
        "en": "Installation drawing torsion spring contact band 17.5 mm, socket version"
      },
      "url": {
        "de": "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-buchsenausfuehrung.pdf",
        "en": "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf"
      }
    },
    "dwg-tors175-pin": {
      "type": "drawing",
      "label": {
        "de": "Einbauzeichnung Drehfeder-Kontaktband 17,5 mm, Steckerausführung",
        "en": "Installation drawing torsion spring contact band 17.5 mm, pin version"
      },
      "url": {
        "de": "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-17-5mm-steckerausfuehrung.pdf",
        "en": "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf"
      }
    },
    "dwg-tors13": {
      "type": "drawing",
      "label": {
        "de": "Einbauzeichnung Drehfeder-Kontaktband 13 mm, Buchsenausführung",
        "en": "Installation drawing torsion spring contact band 13 mm, socket version"
      },
      "url": {
        "de": "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-drehfeder-kontaktband-13mm-buchsenausfuehrung.pdf",
        "en": "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf"
      }
    },
    "ds-hc12-de": {
      "type": "datasheet",
      "label": {
        "de": "Datenblatt Hochstrom-Kontaktband 12 mm",
        "en": "Datasheet high-current contact band 12 mm"
      },
      "url": {
        "de": "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf",
        "en": "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
      }
    },
    "dwg-hc12": {
      "type": "drawing",
      "label": {
        "de": "Zeichnung Hochstrom-Kontaktband 12 mm",
        "en": "Drawing high-current contact band 12 mm"
      },
      "url": {
        "de": "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-hochstrom-kontaktband-12mm.pdf",
        "en": "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-high-current-contact-band-12mm-en.pdf"
      }
    },
    "ds-hc12-2012": {
      "type": "datasheet",
      "label": {
        "de": "Datenblatt Hochstrom-Kontaktband 12 mm",
        "en": "Datasheet high-current contact band 12 mm"
      },
      "url": {
        "de": "https://www.atlas-contacte.de/downloads/datenblaetter/datenblatt-hochstrom-kontaktband-12mm-de.pdf",
        "en": "https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf"
      }
    },
    "dwg-leaf-socket": {
      "type": "drawing",
      "label": {
        "de": "Einbauzeichnung Blattfeder-Kontaktband, Buchsenausführung",
        "en": "Installation drawing leaf spring contact band, socket version"
      },
      "url": {
        "de": "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-buchsenausfuehrung.pdf",
        "en": "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-socket-version-en.pdf"
      }
    },
    "dwg-leaf-pin": {
      "type": "drawing",
      "label": {
        "de": "Einbauzeichnung Blattfeder-Kontaktband, Steckerausführung",
        "en": "Installation drawing leaf spring contact band, pin version"
      },
      "url": {
        "de": "https://www.atlas-contacte.de/downloads/zeichnungen/zeichnung-blattfeder-kontaktband-steckerausfuehrung.pdf",
        "en": "https://www.atlas-contacte.de/downloads/zeichnungen/drawing-leaf-spring-contact-band-pin-version-en.pdf"
      }
    },
    "web-kl-home": {
      "type": "web page",
      "label": { "de": "Kontaktlamellen", "en": "Contact lamellae" },
      "url": {
        "de": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/",
        "en": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/"
      }
    },
    "web-kl-leaf": {
      "type": "web page",
      "label": { "de": "Blattfeder-Kontaktband", "en": "Leaf spring contact band" },
      "url": {
        "de": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/blattfeder-kontaktband/",
        "en": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/leaf-spring-contact-band/"
      }
    },
    "web-kl-tors": {
      "type": "web page",
      "label": { "de": "Drehfeder-Kontaktband", "en": "Torsion spring contact band" },
      "url": {
        "de": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/drehfeder-kontaktband/",
        "en": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/torsion-spring-contact-band/"
      }
    },
    "web-kl-hc": {
      "type": "web page",
      "label": { "de": "Hochstrom-Kontaktband", "en": "High-current contact band" },
      "url": {
        "de": "https://www.atlas-contacte.de/de/produkte/kontaktlamellen/hochstrom-kontaktband/",
        "en": "https://www.atlas-contacte.de/en/products/louvered-contact-bands/high-current-contact-band/"
      }
    },
    "calc": {
      "type": "configurator",
      "label": { "de": "Lamellen-Konfigurator", "en": "Lamella configurator" },
      "url": {
        "de": "https://www.atlas-contacte.de/de/anfrage/",
        "en": "https://www.atlas-contacte.de/en/request-a-quote/"
      }
    }
  }
}
