---
title: "Quality: ISO 9001:2015 Certified (DQS) | ACA Atlas Contacte"
description: Quality management to ISO 9001:2015 (DQS, reg. no. 068040 QM15), optical image measurement and tests to your specification. Download the certificate as a PDF.
url: https://www.atlas-contacte.de/en/company/quality/
lang: en-GB
alternate:
  de: https://www.atlas-contacte.de/de/unternehmen/qualitaet/
alternate_markdown:
  de: https://www.atlas-contacte.de/de/unternehmen/qualitaet/index.md
last_updated: 2026-11-14T14:05:10Z
breadcrumb: Home > Company > Quality
publisher: ACA Atlas Contacte GmbH
---

# Quality to ISO 9001:2015

The quality management system of ACA Atlas Contacte GmbH is certified to ISO 9001:2015 by DQS. We inspect stamped and bent parts and contacts to your drawing, using an optical image measuring system, a measuring microscope and product-specific tests by agreement.

## Dimensional accuracy starts in the tool

With [stamped and bent parts](https://www.atlas-contacte.de/en/products/stamped-bent-parts/), the tool decides whether every part meets the drawing. Because ACA Atlas Contacte designs and builds its own tools, tooling, production and inspection are the responsibility of one team. If a dimension drifts, we correct the cause in our [own tool shop](https://www.atlas-contacte.de/en/services/tool-making/), not just the symptom on the part.

Our quality management system has been certified to ISO 9001 since 2000, currently to ISO 9001:2015 by DQS. Its scope ranges from the development of stamping and bending tools through manufacture, contact welding and thread cutting to assembly.

## ISO 9001:2015 at a glance

| Property | Value |
| --- | --- |
| Standard | ISO 9001:2015 |
| Certification body | DQS GmbH |
| Registration no. | 068040 QM15 |
| Certified company | ACA Atlas Contacte GmbH, Wehr, Germany |
| Scope (original German) | Entwicklung von Stanz-Biegewerkzeugen, Herstellung und Vertrieb von Präzisions-Stanzbiegeteilen, Kontaktteilen einzeln, gegurtet, Kontaktschweißen, Gewindeschneiden, Montieren |
| Valid from | 3 July 2024 |
| Valid until | 2 July 2027 |
| First ISO 9001 certification | 2000, by DQS |

Details as stated on the DQS GmbH certificate dated 26 June 2024, which carries a qualified electronic seal. The scope is quoted in the original German. In English: development of stamping and bending tools, manufacture and sale of precision stamped and bent parts, contact parts loose or taped, contact welding, thread cutting, assembly.

## How we inspect

### Optical image measurement

We measure outlines, distances, radii and angles without contact on an optical image measuring system. Even rolled [contact lamellae](https://www.atlas-contacte.de/en/products/louvered-contact-bands/) can be measured this way without deforming them.

### Optical 100 % inspection

For features that must be right on every single part, 100 % inspection by an automatic optical inspection system is possible by agreement.

### Measuring microscope

Next to the image measuring system, our own measuring room has a measuring microscope for checking small features on the part.

### Force-travel testing

For contact springs we meet your force-travel specification and check it during series production.

### Tests to your specification

Inspection characteristics, scope and documentation are agreed with you for each product, based on your drawing.

## Measured in our own measuring room

ACA Atlas Contacte measures parts in its own measuring room, under one roof with design, tool making and production. The equipment includes an optical image measuring system and a measuring microscope. The image measuring system captures the outline of a part without contact and compares it with the nominal dimensions.

Which characteristics are measured, how often and how they are documented is agreed on the basis of your drawing and your quality requirements.

- Optical image measuring system and measuring microscope
- Own measuring room under one roof with production
- Inspection scope and documentation by agreement

## Quality at every step

1. **Enquiry and feasibility**: We check your drawing for manufacturability: tolerances, material, bend radii, finish. Critical characteristics are clarified before the tool is built.
2. **Tool design**: The strip layout and the tool are designed so that critical dimensions are produced reliably.
3. **Initial samples and approval**: The first parts from the new tool are measured and submitted to you as initial samples for approval.
4. **Series production**: During series production we check the agreed characteristics, and for contact springs also the spring forces.

## Frequently asked questions

### Is ACA Atlas Contacte GmbH certified to ISO 9001?

Yes. The quality management system of ACA Atlas Contacte GmbH is certified to ISO 9001:2015 by DQS GmbH, registration number 068040 QM15, valid from 3 July 2024 to 2 July 2027.

### What is the scope of the ACA ISO 9001 certificate?

The ISO 9001:2015 certificate of ACA Atlas Contacte GmbH covers the development of stamping and bending tools, the manufacture and sale of precision stamped and bent parts and of contact parts supplied loose or taped, contact welding, thread cutting and assembly.

### Is the ACA ISO 9001 certificate available in English?

The current ISO 9001:2015 certificate of ACA Atlas Contacte GmbH is available as a German PDF in the downloads section of atlas-contacte.de. An English version can be requested from ACA.

### What inspection documentation do I receive for my parts?

ACA agrees inspection characteristics, scope and documentation with each customer for each product, based on the drawing and the quality requirements. We supply REACH Article 33 (SVHC) information for CuBe parts on request.

## Related pages

- [Downloads](https://www.atlas-contacte.de/en/downloads/): Datasheets, installation drawings, ISO 9001 certificate and terms as PDF
- [History](https://www.atlas-contacte.de/en/company/history/): The key milestones of ACA Atlas Contacte since 1987
- [Tool making](https://www.atlas-contacte.de/en/services/tool-making/): Stamping and bending tools from our own toolroom
- [Designing stamped parts](https://www.atlas-contacte.de/en/knowledge/designing-stamped-parts/): Rules of thumb for bend radii, hole diameters, web widths and tolerances

## State your inspection requirements in the enquiry

Send us your drawing, quantity and inspection requirements. We take them into account when the tool is designed.

- [Request a quote](https://www.atlas-contacte.de/en/request-a-quote/)
- [All downloads](https://www.atlas-contacte.de/en/downloads/)

**Source:** [Quality: ISO 9001:2015 Certified (DQS) | ACA Atlas Contacte](https://www.atlas-contacte.de/en/company/quality/) · ACA Atlas Contacte GmbH, Wallbacher Straße 5, 79664 Wehr, Germany · Phone +49 7761 4420 · info@atlas-contacte.de · [Request a quote](https://www.atlas-contacte.de/en/request-a-quote/)
