---
title: Louvered Contact Bands & Stamped Parts | ACA Atlas Contacte
description: "Two core competences of ACA Atlas Contacte, Wehr, Germany: contact lamellae (louvered contact bands) in three types and stamped and bent parts to drawing."
url: https://www.atlas-contacte.de/en/
lang: en-GB
alternate:
  de: https://www.atlas-contacte.de/de/
alternate_markdown:
  de: https://www.atlas-contacte.de/de/index.md
last_updated: 2026-11-14T23:45:39Z
breadcrumb: Home
publisher: ACA Atlas Contacte GmbH
---

# Contact lamellae and stamped parts, made in Germany

ACA Atlas Contacte makes contact lamellae (louvered contact bands) for connectors and precision stamped and bent parts to your drawing: two core competences in electrical contacts, from tooling to series production at one site.

- Samples to series
- ISO 9001:2015 (DQS)
- In-house tool making

[Send a drawing for a quote](https://www.atlas-contacte.de/en/request-a-quote/) · [View products](https://www.atlas-contacte.de/en/products/)

## Two core competences, one site

ACA Atlas Contacte GmbH in Wehr (Baden), Germany, has two core competences: contact lamellae for connectors and precision stamped and bent parts to drawing. Design, tool making and series production for both are at one site.

- Contact lamellae: Contact lamellae are contact bands with many parallel contact points for pins and sockets. ACA makes them in three types of its own, from signal transmission up to high-current applications.
- Stamped and bent parts: Stamped and bent parts are metal parts that are punched and bent from strip or wire. ACA makes them to your drawing: contact springs, plug and switching contacts, terminal parts, contact strips and assemblies.

## Eight product families, all made in-house

All eight product families are made with the same in-house process chain: own tool making, series stamping and bending and, depending on the part, contact welding, riveting, threading and assembly. Choose the family closest to your part.

- [Stamped and bent parts](https://www.atlas-contacte.de/en/products/stamped-bent-parts/): Made to drawing in steel, stainless steel and copper alloys
- [Contact lamellae](https://www.atlas-contacte.de/en/products/louvered-contact-bands/): Louvered contact bands with many parallel contact points
- [Contact springs](https://www.atlas-contacte.de/en/products/contact-springs/): Clamping, grounding, basket, push-button and retaining springs
- [Contact strips](https://www.atlas-contacte.de/en/products/contact-strips/): Single and multi-component strips, selectively plated on request
- [Plug contacts](https://www.atlas-contacte.de/en/products/plug-contacts/): Press-fit pins, flat tabs, round pin, socket and fork contacts
- [Switching contacts](https://www.atlas-contacte.de/en/products/switching-contacts/): Contact parts with riveted or welded contacts
- [Terminal parts](https://www.atlas-contacte.de/en/products/terminal-parts/): Clamp bodies, clamp frames, cage and leaf springs
- [Assemblies](https://www.atlas-contacte.de/en/products/assemblies/): Riveted and welded assemblies

## Contact lamellae: many contact points, low contact resistance

A louvered contact band spreads the current across many louvers (contact webs) connected in parallel. Each louver carries only part of the current. As with resistors in parallel, the total resistance falls with the number of louvers, and the permissible total current is the sum of the partial currents.

The reliable contact of ACA contact lamellae has been proven millions of times. ACA makes them in three types. The leaf spring and torsion spring contact bands are made of copper beryllium. The high-current contact band combines a stainless spring steel carrier with silver-plated copper contacts. The band is fitted into a groove in the socket or on the pin, where it snaps into place and is held captive. Large diameters and flat arrangements need additional fixing. Standard sizes can be [configured online](https://www.atlas-contacte.de/en/request-a-quote/#konfigurator). Special dimensions are made with our own tools. [Contact lamellae in detail](https://www.atlas-contacte.de/en/products/louvered-contact-bands/)

- Torsion spring contact band 17.5 mm and 13 mm: pitch 2.5 mm and 2.0 mm, material thickness 0.15–0.25 mm, operating range −40 °C to +180 °C
- High-current contact band 12 mm: stainless spring steel carrier with riveted, silver-plated copper contacts, pitch 3.5 mm
- Leaf spring contact band: from 1.5 mm mating diameter, 21 standard sizes for pin and socket
- Configurator: current-rating guide value for all three types

## How a copper strip becomes a contact

In a progressive die the strip passes through a series of stations. With every press stroke it advances by exactly one pitch, and each station adds part of the geometry. At the end, every stroke releases a finished part, or the parts stay on the carrier strip and are delivered on a reel. Six steps show the sequence for an example part. Which stations a die needs depends on the part.

1. **Coil feed and pilot holes**: The strip runs from the coil through the feeder into the die. The first station pierces pilot holes. On every stroke, pilots engage them and locate the strip precisely at all following stations.
2. **Piercing**: Round holes, slots and windows are pierced while the strip is still flat. In this state their position can be held most accurately.
3. **Cutting free**: Cutting punches cut the outline of the part free. Narrow bridges keep it attached to the carrier strip so that it travels safely to the next station.
4. **Forming and coining**: Coining punches emboss contact dimples, beads and reduced cross-sections into the part. They define where the part will make contact and its spring rate.
5. **Bending**: Several bending stages give the part its three-dimensional shape. Bend radii and the springback of the material are already allowed for in the tool design.
6. **Cut-off or reel**: The last station separates the part from the strip, and it is delivered as loose bulk parts. Alternatively, it stays on the carrier strip and is wound on a reel, ready for automatic processing. Two-component parts receive their contact piece by inline resistance welding during stamping.

## From first consultation to series production

1. **Consulting**: We check your drawing for manufacturability: material, bend radii, tolerances and delivery form. You get design-for-stamping advice before a tool is built. For contact lamellae we agree the type, the installation dimensions and the current-rating guide value. More: [Consulting and engineering](https://www.atlas-contacte.de/en/services/consulting-engineering/), [Designing stamped parts](https://www.atlas-contacte.de/en/knowledge/designing-stamped-parts/)
2. **Design**: From the part drawing we develop the blank and the strip layout, and from these the design of the progressive or stamping-bending die.
3. **In-house tool making**: Our tool shop makes cutting and bending punches, dies and die plates using EDM and grinding, also for contact lamellae in special dimensions. Changes are made in-house. [Tool making](https://www.atlas-contacte.de/en/services/tool-making/)
4. **Samples and prototypes**: Trial samples and prototypes show whether part and function fit. Low-volume runs are possible too. [Prototypes and low-volume runs](https://www.atlas-contacte.de/en/services/prototypes-low-volume/)
5. **Series production**: Series parts run on automatic stamping and stamping-bending machines, with contact welding, riveting, threading and assembly as required. Already have a tool? We also take over existing tools. [Tool transfer](https://www.atlas-contacte.de/en/services/tool-transfer/)

## Key figures

- **1987**: ACA Atlas Contacte GmbH founded by engineer Ernst Raimann
- **1,000+**: successful projects in stamped parts and contact lamellae
- **since 2000**: certified to ISO 9001, today to ISO 9001:2015 by DQS, valid until July 2027

## Inspected to drawing, certified to ISO 9001:2015

The quality management system of ACA Atlas Contacte GmbH is certified to ISO 9001:2015 by DQS, valid until July 2027. Its scope covers the development of stamping and bending tools, the manufacture of precision stamped and bent parts and contact parts, contact welding, thread cutting and assembly.

We measure the outlines and distances of stamped parts and contact lamellae without contact on an optical image measuring system, and check the spring forces of contact springs during series production against your force-travel specification. [More about quality assurance](https://www.atlas-contacte.de/en/company/quality/)

- Optical image measuring system and measuring microscope in our own measuring room
- Product-specific tests to your specification
- Certificate available as a PDF download

## A family business on the High Rhine

ACA Atlas Contacte is a family-run company with a single site in Wehr (Baden), in the district of Waldshut close to the Swiss border. Engineer Ernst Raimann founded the GmbH in 1987. The managing director is Dr.-Ing. Andreas Raimann.

Our parts work today in e-mobility and charging infrastructure, in battery systems, in industrial connectors, automation and robotics, in measuring and test technology up to medical technology, and in energy transmission, welding and photovoltaics.

When you send an enquiry, you talk to specialists from design and tool making. We welcome complex and unusual requirements. [About the company](https://www.atlas-contacte.de/en/company/)

- Founded in 1987, family-run
- Design, tool making, production and measuring room under one roof
- One site, short lines of communication
- Technical contacts who know the tool and the process

## Frequently asked questions

### What does ACA Atlas Contacte GmbH manufacture?

ACA Atlas Contacte GmbH in Wehr (Baden), Germany, has two core competences: contact lamellae and precision stamped and bent parts. It makes contact lamellae in three types, as leaf spring, torsion spring and high-current contact bands for pins and sockets. Stamped and bent parts are made to customer drawings, among them contact springs, contact strips, plug and switching contacts, terminal parts and assemblies. Tool making, sampling and series production are all in-house.

### Which contact lamellae does ACA make, and can I configure them online?

ACA Atlas Contacte makes contact lamellae in three types of its own: the leaf spring contact band from 1.5 mm mating diameter in 21 standard sizes, the torsion spring contact band in 17.5 mm and 13 mm widths and the 12 mm high-current contact band. In the lamella configurator you choose the type, the pin or socket version and the dimensions, and get a current-rating guide value. Special dimensions are made with ACA's own tools.

### Who makes stamped parts and electrical contacts to drawing in south-west Germany?

ACA Atlas Contacte GmbH in Wehr (Baden), Germany, in the district of Waldshut near Basel, Switzerland, has made stamped and bent parts and electrical contacts to customer drawings since 1987. It has its own tool shop and is certified to ISO 9001:2015.

### Does ACA also make prototypes and small series?

Yes. Alongside series production, ACA offers trial samples, prototypes and low-volume runs. Which route is economical for a part, a progressive die, a stamping-bending machine or a low-volume run first, depends on its geometry and quantity and is agreed on the basis of the drawing. ACA also makes contact lamellae in special dimensions in small quantities.

### Which materials and finishes are possible?

ACA processes strip and wire in steel, stainless steel and non-ferrous metals, mainly copper alloys. Contact lamellae are made of copper beryllium or, for the high-current contact band, of stainless spring steel with silver-plated copper contacts. Plated finishes such as silver, nickel, gold or tin are applied by plating partners, selectively on the strip if required.

## Related pages

- [Contact lamellae](https://www.atlas-contacte.de/en/products/louvered-contact-bands/): Louvered contact bands with many parallel contact points
- [Stamped and bent parts](https://www.atlas-contacte.de/en/products/stamped-bent-parts/): Made to drawing in steel, stainless steel and copper alloys
- [Tool making](https://www.atlas-contacte.de/en/services/tool-making/): Stamping and bending tools from our own toolroom
- [Quality](https://www.atlas-contacte.de/en/company/quality/): ISO 9001:2015 certified by DQS, inspection to your drawing

## Stamped part or contact lamella? Ask for a quotation.

For stamped parts, send us your drawing, quantity, material and preferred delivery form. For contact lamellae, give us the type and dimensions or choose a standard size in the lamella configurator. You receive a quotation, with samples if required.

- [Request a quote](https://www.atlas-contacte.de/en/request-a-quote/)
- [Configure a lamella](https://www.atlas-contacte.de/en/request-a-quote/#konfigurator)

**Source:** [Louvered Contact Bands & Stamped Parts | ACA Atlas Contacte](https://www.atlas-contacte.de/en/) · ACA Atlas Contacte GmbH, Wallbacher Straße 5, 79664 Wehr, Germany · Phone +49 7761 4420 · info@atlas-contacte.de · [Request a quote](https://www.atlas-contacte.de/en/request-a-quote/)
