---
title: Stamping and Contact Technology Guides | ACA Atlas Contacte
description: "Practical know-how from Wehr, Germany: contact materials and finishes, contact types compared, design rules for stamped parts and a glossary of 77 terms."
url: https://www.atlas-contacte.de/en/knowledge/
lang: en-GB
alternate:
  de: https://www.atlas-contacte.de/de/wissen/
alternate_markdown:
  de: https://www.atlas-contacte.de/de/wissen/index.md
last_updated: 2026-11-14
breadcrumb: Home > Knowledge
publisher: ACA Atlas Contacte GmbH
---

# Guides to stamping and contact technology

Materials, finishes, contact types and design rules for stamped and bent parts and electrical contacts, compiled by ACA Atlas Contacte GmbH in Wehr (Baden), Germany. For design engineers who want to get the early decisions right, and for buyers who need to compare quotes.

## Knowledge that belongs on the drawing

Most of the cost of a stamped part or an electrical contact is fixed at the design stage, long before a tool is built. Material, finish, bend radii and contact principle determine unit price, tooling effort, current rating and service life. Engineers who understand these relationships write better specifications and receive quotes that can genuinely be compared.

These guides collect what matters for precision stamped and bent parts, contact springs and contact lamellae. They explain principles and trade-offs, but they do not replace the design of your part. We define binding values together with you, based on your drawing, your quantities and your operating conditions.

## Four guides

### Materials and finishes

CuSn, CuBe, CuNiSi, CuFeP, brass, copper, stainless and carbon spring steel compared: conductivity against spring properties. Plus silver, tin, gold and nickel and when each finish makes sense. [Read the materials guide](https://www.atlas-contacte.de/en/knowledge/materials-finishes/)

### Contact types compared

Leaf spring, torsion spring and high-current contact bands, slotted sockets, canted coil springs, hyperboloid contacts, stamped cantilever contacts and fork contacts. Current rating, mating cycles, insertion force, installation space and cost in one table. [See the comparison](https://www.atlas-contacte.de/en/knowledge/contact-types-compared/)

### Designing stamped parts

Rules of thumb for bend radii, hole diameters and web widths, plus burr side, rolling direction, tolerances, carrier strip design and notes on plated parts. [Read the design rules](https://www.atlas-contacte.de/en/knowledge/designing-stamped-parts/)

### Glossary

77 technical terms, such as bend radius, press-fit zone and rolling direction, explained in a few sentences and each linked to the matching product, service or guide page. [Open the glossary](https://www.atlas-contacte.de/en/knowledge/glossary/)

## General principles, applied to real parts

These guides summarise generally accepted principles of stamping and contact technology and relate them to production as ACA Atlas Contacte GmbH runs it in Wehr: with its own tool shop, progressive dies, stamping and bending machines and a measuring room. Where a rule reaches its limits, the page says so.

General rules of thumb are labelled as such and match our production practice. Ratings for our contact lamellae come from ACA datasheets, installation drawings and the previous ACA product pages. Where no reliable value exists, the page says "on request".

- Standards named by designation, for example DIN 6930-2 and IEC 60352-5
- With a last-updated date on every page
- No substitute for testing in the actual installation

## From guide to part

- [Stamped and bent parts](https://www.atlas-contacte.de/en/products/stamped-bent-parts/): Made to drawing in steel, stainless steel and copper alloys
- [Contact lamellae](https://www.atlas-contacte.de/en/products/louvered-contact-bands/): Louvered contact bands with many parallel contact points
- [Contact springs](https://www.atlas-contacte.de/en/products/contact-springs/): Clamping, grounding, basket, push-button and retaining springs
- [Contact strips](https://www.atlas-contacte.de/en/products/contact-strips/): Single and multi-component strips, selectively plated on request
- [Plug contacts](https://www.atlas-contacte.de/en/products/plug-contacts/): Press-fit pins, flat tabs, round pin, socket and fork contacts
- [Switching contacts](https://www.atlas-contacte.de/en/products/switching-contacts/): Contact parts with riveted or welded contacts

## Related pages

- [Consulting and engineering](https://www.atlas-contacte.de/en/services/consulting-engineering/): Design for manufacture from the first sketch
- [Surface finishes](https://www.atlas-contacte.de/en/services/surface-finishes/): Electroplated finishes through qualified partners
- [Downloads](https://www.atlas-contacte.de/en/downloads/): Datasheets, installation drawings, ISO 9001 certificate and terms as PDF

## Can't find your answer?

Send us your drawing or describe your application. You will receive a technical assessment and a quotation.

- [Send an enquiry](https://www.atlas-contacte.de/en/request-a-quote/)
- [Contact us](https://www.atlas-contacte.de/en/contact/)

**Source:** [Stamping and Contact Technology Guides | ACA Atlas Contacte](https://www.atlas-contacte.de/en/knowledge/) · ACA Atlas Contacte GmbH, Wallbacher Straße 5, 79664 Wehr, Germany · Phone +49 7761 4420 · info@atlas-contacte.de · [Request a quote](https://www.atlas-contacte.de/en/request-a-quote/)
