---
title: High-Current Contact Band 12 mm | ACA Atlas Contacte
description: "High-current contact band 12 mm: over 40 A per contact (guide value), 0.50 mΩ, approx. 6 N per contact. Stainless steel carrier, silver-plated copper."
url: https://www.atlas-contacte.de/en/products/louvered-contact-bands/high-current-contact-band/
lang: en-GB
alternate:
  de: https://www.atlas-contacte.de/de/produkte/kontaktlamellen/hochstrom-kontaktband/
alternate_markdown:
  de: https://www.atlas-contacte.de/de/produkte/kontaktlamellen/hochstrom-kontaktband/index.md
last_updated: 2026-11-16T14:59:55Z
breadcrumb: Home > Products > Contact lamellae > High-current contact band
publisher: ACA Atlas Contacte GmbH
---

# High-current contact band

The 12 mm high-current contact band is a two-component high-current contact: a carrier strip of stainless spring steel provides the contact force, riveted contact pieces of silver-plated copper carry the current. Made in Wehr (Baden), Germany, for round and flat contacts.

## Two materials, two jobs

In a one-piece [contact lamella](https://www.atlas-contacte.de/en/products/louvered-contact-bands/), a single material must be both a good spring and a good conductor. The **high-current contact band** separates the two jobs. A carrier strip of stainless spring steel with high strength and high relaxation resistance provides mechanical stability and contact force. Individual contact pieces of high-conductivity copper are riveted onto the sprung carrier and carry the current.

Besides conductivity, the 0.6 mm copper contact pieces offer a high heat capacity. This gives the band a very high short-circuit withstand capability. Because the spring work is done by the steel, the band needs only low contact forces. This reduces wear and allows use under dynamic loads and on moving parts.

In service the band is fixed captively in a groove designed for it: a turned groove in a socket, or an undercut groove in a flat contact.

## Construction: steel springs, copper conducts

The carrier strip of the high-current contact band is 12 mm wide. Two continuous side rails are linked by cross webs at a pitch of 3.5 mm. A riveted copper contact piece sits on each cross web. The contact pieces are tilted out of the strip plane, and the raised edge forms the contact line to the mating contact.

As standard, the contact pieces are silver-plated and passivated for easy sliding, with the silver applied by qualified partners. We choose the silver thickness to suit the application, with 20 µm as standard. Given a thin film of suitable contact lubricant, the band slides more easily and needs lower insertion forces. More in our guide to [materials and finishes](https://www.atlas-contacte.de/en/knowledge/materials-finishes/).

- Unloaded height 2.5 mm, radial installation height 1.5–2.0 mm, ideally 1.6–1.8 mm
- Band length L = number of contacts × 3.5 mm
- Supplied by the metre or as cut pieces with a defined number of contacts

## Technical data: high-current contact band 12 mm

| Property | Value |
| --- | --- |
| Rated current per contact | over 40 A (guide value, depends on the application, verify in service) |
| Contact resistance per contact | 0.50 mΩ (mating contact Cu silver-plated), 0.70 mΩ (brass silver-plated) |
| Contact force per contact | approx. 6 N at 1.5 mm installation height |
| Mating contact in silver-plated brass | current values × 0.6 |
| Carrier strip | stainless spring steel |
| Contact pieces | copper, silver-plated, passivated for easy sliding, riveted |
| Finish and silver thickness | silver only, 20 µm as standard, chosen to suit the application |
| Band width | 12 mm |
| Pitch | 3.5 mm |
| Thickness of copper contact pieces | 0.6 mm |
| Unloaded height | 2.5 mm |
| Radial installation height (working range) | 1.5–2.0 mm, ideally 1.6–1.8 mm |
| Friction coefficient for insertion force | 0.4–0.6, lower with contact lubricant |
| Temperature range | −40 °C to +150 °C |
| Short-circuit withstand capability | very high, figure on request |
| Mating cycles | on request |
| Mating diameter D | from 20 mm |
| Delivery form | by the metre or as pieces with a defined number of contacts |

Values from the datasheet, drawing and product page. Resistances apply to mating contacts in silver-plated copper under ideal conditions with adequately sized conductors. The rated current depends on the application and must be verified in service.

## Installation in round and flat contacts

In round contacts the high-current contact band is preferably mounted in the socket. It is laid into a turned groove and held there by its own preload. Large diameters may need additional fixing.

In flat contacts the band sits in an undercut groove. The groove can be made in two ways: in one piece, milled directly into the conductor, or with screwed-on cover plates that form the retaining lips. We define other fixing methods with you to suit the application.

- Variant 1: undercut groove machined into the conductor
- Variant 2: retaining lips formed by screwed cover plates
- Contact lubricant lowers the insertion forces

## Groove dimensions for round and flat contacts

| Property | Value |
| --- | --- |
| Round contact: installation | preferably in the socket, in a turned groove, held by its own preload |
| Round contact: radial groove depth | 1.6 mm |
| Round contact: groove width | 12.3 mm |
| Flat contact: slot opening | 9.1 +0.2 mm |
| Flat contact: groove width | 12.3 +0.2 mm |
| Flat contact: total groove depth | 1.5 mm |
| Flat contact: undercut height | 1.2 mm |

Dimensions from datasheet p. 6. Large diameters may need additional fixing. Further fixing methods are possible depending on the application.

## Advantages of the high-current contact band

### Low contact forces

Around 6 N per contact at 1.5 mm installation height. This reduces wear and extends the service life of the connection.

### High current rating

High-conductivity copper contact pieces with 0.50 mΩ per contact. Guide value for the rated current: above 40 A per contact, depending on the application.

### Very high short-circuit withstand capability

The copper contact pieces have a high heat capacity, so the band copes particularly well with short current peaks.

### For moving parts

Suitable for dynamic applications and moving parts, at temperatures from −40 °C to +150 °C.

### Round or flat

Usable in round contacts and in flat contacts. Any length in steps of 3.5 mm.

### Special versions

Our modular tool design lets us build custom versions as well.

## Applications for high-current contacts

Customers use the ACA Atlas Contacte high-current contact band in these industries today.

- **Power transmission systems**: Very high currents across large contact areas, round or flat.
- **EV charging infrastructure**: Power contacts for high currents in charging connectors and charging stations.
- **Electric vehicles and high-performance batteries**: Pluggable high-current connections.
- **Drive technology and robots**: Contacts on moving parts, where low contact forces limit wear.
- **Electroplating plants**: Current feeds and contacts for high currents in electroplating plants.
- **Industrial connectors**: Power connectors with large mating diameters.

## Configure a high-current contact band

The lamella configurator calculates a guide value for the current rating of the high-current contact band. Enter the mating diameter or the band length in steps of 3.5 mm, and the details go straight into your request.

Configurator in the browser: https://www.atlas-contacte.de/en/products/louvered-contact-bands/high-current-contact-band/#konfigurator, https://www.atlas-contacte.de/en/request-a-quote/?bauart=band. Size matrix and options as JSON: https://www.atlas-contacte.de/data/lamellen.json. Requests by HTTP POST to https://www.atlas-contacte.de/api/anfrage.php with `mode=lamella` (fields in https://www.atlas-contacte.de/llms.txt).

## Datasheet and drawing

For the 12 mm high-current contact band, ACA Atlas Contacte provides the datasheet and the drawing as PDF. Groove dimensions and electrical values for round and flat contacts are also in the tables on this page. The force-deflection curve and CAD data are available on request.

- [Datasheet high-current contact band 12 mm](https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-high-current-contact-band-12mm-en.pdf) (PDF, en)
- [Drawing high-current contact band 12 mm](https://www.atlas-contacte.de/downloads/zeichnungen/drawing-high-current-contact-band-12mm-en.pdf) (PDF, en)

## Frequently asked questions

### How much current does the high-current contact band carry?

The guide value is above 40 A per contact. The total current follows from the number of contacts engaged. The actual rated current depends on mating contact, conductor cross-section, cooling and permissible temperature rise, and must be verified in the application. With mating contacts in silver-plated brass instead of silver-plated copper, allow for 0.6 times the current.

### Why does the high-current contact band need so little contact force?

Spring steel and copper share the work. The spring steel delivers a defined force of around 6 N per contact at 1.5 mm installation height, the copper conducts. According to the datasheet, the band works with low contact forces combined with a high current rating. This reduces insertion force and wear.

### Can the high-current contact band be used in flat contacts?

Yes. In flat contacts the high-current contact band is held in an undercut groove, either milled directly into the conductor or formed by screwed-on cover plates. The groove has an opening of 9.1 +0.2 mm, a width of 12.3 +0.2 mm, a total depth of 1.5 mm and an undercut of 1.2 mm.

### What installation height does the high-current contact band need?

The high-current contact band is 2.5 mm high when unloaded. The working range is a radial installation height of 1.5 to 2.0 mm, ideally 1.6 to 1.8 mm. Below 1.5 mm the force rises steeply.

### What lengths is the high-current contact band supplied in?

The high-current contact band is supplied by the metre or as cut pieces with the required number of contacts. The length is the number of contacts times 3.5 mm.

## Related pages

- [Contact lamellae](https://www.atlas-contacte.de/en/products/louvered-contact-bands/): Louvered contact bands with many parallel contact points
- [Torsion spring contact band](https://www.atlas-contacte.de/en/products/louvered-contact-bands/torsion-spring-contact-band/): Twisted beryllium copper louvers for mating diameters from 8 mm
- [Leaf spring contact band](https://www.atlas-contacte.de/en/products/louvered-contact-bands/leaf-spring-contact-band/): Compact beryllium copper contact lamella from 1.5 mm mating diameter
- [Contact welding and riveting](https://www.atlas-contacte.de/en/services/contact-welding-riveting/): Resistance welding and riveting in-house
- [Contact types compared](https://www.atlas-contacte.de/en/knowledge/contact-types-compared/): Which contact type suits your current, mating cycles and space
- [Materials and finishes](https://www.atlas-contacte.de/en/knowledge/materials-finishes/): Copper alloys, spring steels and contact platings compared

## Request high-current contact bands

Configure the mating diameter or band length directly in the [configurator above](https://www.atlas-contacte.de/en/products/louvered-contact-bands/high-current-contact-band/#konfigurator). For flat contacts, the drawing of your conductor with current, installation and quantity is the best starting point.

- [Send your drawing](https://www.atlas-contacte.de/en/request-a-quote/#zeichnung)
- [Request samples](https://www.atlas-contacte.de/en/request-a-quote/#muster)

**Source:** [High-Current Contact Band 12 mm | ACA Atlas Contacte](https://www.atlas-contacte.de/en/products/louvered-contact-bands/high-current-contact-band/) · ACA Atlas Contacte GmbH, Wallbacher Straße 5, 79664 Wehr, Germany · Phone +49 7761 4420 · info@atlas-contacte.de · [Request a quote](https://www.atlas-contacte.de/en/request-a-quote/)
