---
title: Torsion Spring Contact Band 13/17.5 mm | ACA Atlas Contacte
description: "Torsion spring contact band 17.5 and 13 mm in relaxation-resistant, silver-plated CuBe for high-current contacts from Ø 8 mm: 0.30–0.55 mΩ, up to 31 A per louver."
url: https://www.atlas-contacte.de/en/products/louvered-contact-bands/torsion-spring-contact-band/
lang: en-GB
alternate:
  de: https://www.atlas-contacte.de/de/produkte/kontaktlamellen/drehfeder-kontaktband/
alternate_markdown:
  de: https://www.atlas-contacte.de/de/produkte/kontaktlamellen/drehfeder-kontaktband/index.md
last_updated: 2026-11-16T14:59:55Z
breadcrumb: Home > Products > Contact lamellae > Torsion spring contact band
publisher: ACA Atlas Contacte GmbH
---

# Torsion spring contact band

The torsion spring contact band, also called torsion spring lamella or torsion spring louvered band, carries high currents through twisted louvers (contact webs) of relaxation-resistant beryllium copper. Made in Wehr (Baden), Germany, in band widths of 17.5 mm and 13 mm, for mating diameters from 8 mm.

## Contact force from torsion, current on the shortest path

In the **torsion spring contact band** the contact force comes from torsion of the louvers, not from bending. Each louver twists about its own long axis when pin and socket are mated. Compared with the louvers of the [leaf spring contact band](https://www.atlas-contacte.de/en/products/louvered-contact-bands/leaf-spring-contact-band/), which are loaded in bending, the spring characteristic is flatter, so the usable working range is larger. The leaf spring contact band covers the small mating diameters from 1.5 mm. Our guide [contact types compared](https://www.atlas-contacte.de/en/knowledge/contact-types-compared/) sets out all designs side by side.

The main advantage is the current path: the current flows by the shortest route directly from the pin through the louver into the socket. Combined with the principle of many parallel contact points, this gives a high current rating with low contact resistance.

Design engineers therefore typically fit the torsion spring contact band in larger power connectors from 8 mm mating diameter. On insertion the louvers wipe across the contact surface and clean it, so the connection makes reliable contact even in harsh environments and under vibration.

## Advantages of the torsion spring contact band

### High current rating

Direct current path from pin to socket and many parallel louvers. With greater material thickness the resistance per louver falls from 0.55 to 0.30 mΩ. At the same current, the connection heats up markedly less.

### Wide working range

Torsion of the louvers gives a flatter spring characteristic than leaf spring louvers. Contact force per louver rises with material thickness and deflection.

### Robust in harsh environments

Suitable for vibration and adverse conditions. Self-cleaning on mating, operating range −40 °C to +180 °C, high short-circuit withstand capability.

### Economical installation

The band is laid into a turned groove and held there by its own preload. The toothed legs locate it laterally.

## How the torsion spring contact band is built

The torsion spring contact band is stamped and formed from beryllium copper (CuBe). It is then age-hardened and silver-plated to obtain the required mechanical and electrical properties. We age-harden in-house, and qualified partners apply the silver plating. The silver surface is passivated. For special cases the band is also available bare. More in our guide to [materials and finishes](https://www.atlas-contacte.de/en/knowledge/materials-finishes/).

We make the band in two widths: 17.5 mm with a 2.5 mm pitch and 13 mm with a 2.0 mm pitch. Two continuous side rails carry the transverse louvers, on the 17.5 mm band one louver per 2.5 mm. The outer edges of the rails are toothed to form legs. The legs are angled by the leg angle A of 0°, 15° or 45° and key the band into the groove of the socket or pin. On the 13 mm band the louvers run on an angled path from rail to rail, one louver per 2.0 mm, and the legs stand at 45°.

- Width over the legs: 17.5 mm at A = 0° or 15°, 16.9 mm at A = 45°
- Material thickness S: 0.15 mm, 0.2 mm or 0.25 mm
- Number of louvers N = band length L ÷ pitch (2.5 mm or 2.0 mm)

## Technical data: torsion spring contact band 13 and 17.5 mm

| Property | 13 mm | 17.5 mm |
| --- | --- | --- |
| Mating diameter D | from 8 mm | from 8 mm |
| Installation | socket version (pin version on request) | socket or pin version, socket recommended from 20 mm mating diameter |
| Material | Beryllium copper (CuBe), relaxation-resistant | Beryllium copper (CuBe), relaxation-resistant |
| Finish | silver-plated or bare | silver-plated and passivated, bare as an option |
| Silver thickness | on request | on request |
| Band width | 12.9 mm flat | 17.5 ± 0.3 mm over the legs (A = 0°/15°), 16.9 ± 0.3 mm (A = 45°) |
| Louver pitch | 2.0 mm | 2.5 mm |
| Unloaded height | 1.8 mm | on request |
| Material thickness S | 0.2 mm | 0.15 / 0.2 / 0.25 mm |
| Leg angle A | 45° | 0° / 15° / 45° |
| Contact resistance per louver | on request | 0.55 mΩ (S = 0.15 mm) / 0.40 mΩ (S = 0.2 mm) / 0.30 mΩ (S = 0.25 mm) |
| Current rating per louver (guide value) | 25 A, silver-plated, bare × 0.8 | 20 A (S = 0.15 mm) / 28 A (S = 0.2 mm) / 31 A (S = 0.25 mm), silver-plated, bare × 0.8 |
| Mating contact in silver-plated brass | on request | resistance +40 %, current values × 0.6 |
| Friction coefficient for insertion force | on request | approx. 0.3 |
| Temperature range | on request | −40 °C to +180 °C |
| Short-circuit withstand capability | on request | high, figure on request |
| Mating cycles | on request | on request |
| Delivery form | pre-rounded ready to install, or flat strip section cut to length | pre-rounded ready to install, or flat strip section cut to length |
| General tolerance of the drawings | on request | ISO 2768-m |

Values from the 17.5 mm datasheet and the installation drawings of both widths, current rating guide values from the lamella configurator. Resistances apply to mating contacts in silver-plated copper under ideal conditions. The current rating depends on the installation, so higher or lower values are possible. Verify the value by measurement in the application.

## Installation in the socket, on the pin or on a flange

The torsion spring contact band is usually built as a socket version. This simplifies assembly, and inside the socket the lamella is protected from external mechanical damage. The pre-rounded band is laid into the turned groove and held there by its own preload.

From 20 mm mating diameter, we recommend the socket version. On a pin of that size the band would no longer hold securely without special fixing. On the pin version the louvers may overlap at the joint.

For very high power, several bands can be arranged in parallel, for example as a circular contact on a flange. Large dimensions and flat contact arrangements need special fixing, which we define with you for your design.

## Installation dimensions for socket and pin

| Property | 13 mm | 17.5 mm |
| --- | --- | --- |
| Socket version: bore | D +0.05 mm | D +0.05 mm |
| Socket version: groove diameter in the socket | D + 2.0 mm | D + 1.6 mm |
| Socket version: pin diameter | D −0.03 mm | D −0.03 mm |
| Pin version: socket bore | on request | D +0.05 mm |
| Pin version: groove diameter on the pin | on request | D − 1.6 mm |
| Pin version: pin diameter | on request | D −0.03 mm |
| Groove width | 13.2 mm | 17.9 mm (A = 0°/15°), 17.3 mm (A = 45°) |

Dimensions from the installation drawings: socket and pin version 17.5 mm, socket version 13 mm. D is the mating diameter. By calculation, the groove gives a radial installation height of about 1.0 mm for the 13 mm band and 0.8 mm for the 17.5 mm band. The drawing shows the grooves of the 17.5 mm band.

## Applications for torsion spring contacts

Customers use the ACA Atlas Contacte torsion spring contact band in these industries today.

- **Electric vehicles**: High-current connectors in electric vehicles.
- **EV charging infrastructure**: Power contacts in charging connectors and charging stations.
- **High-performance battery systems**: Pluggable connections for high currents.
- **Drive technology and robots**: Power contacts on drives and robots.
- **Power transmission systems**: Very high power through parallel bands, for example on a flange.
- **Electroplating plants**: High-current contacts in electroplating plants.
- **Industrial connectors**: Circular power connectors from 8 mm mating diameter.

## Configure a torsion spring contact band

The lamella configurator calculates a guide value for the current rating of the torsion spring contact band. Choose band width, pin or socket version, mating diameter or band length, material thickness, leg angle and finish.

Configurator in the browser: https://www.atlas-contacte.de/en/products/louvered-contact-bands/torsion-spring-contact-band/#konfigurator, https://www.atlas-contacte.de/en/request-a-quote/?bauart=tors. Size matrix and options as JSON: https://www.atlas-contacte.de/data/lamellen.json. Requests by HTTP POST to https://www.atlas-contacte.de/api/anfrage.php with `mode=lamella` (fields in https://www.atlas-contacte.de/llms.txt).

## Datasheet and installation drawings

For the torsion spring contact band, ACA Atlas Contacte provides one datasheet per band width and three installation drawings as PDF: the 17.5 mm socket and pin versions and the 13 mm socket version. The installation dimensions and electrical values are also in the tables on this page. Force-deflection curves and CAD data are available on request.

- [Datasheet torsion spring contact band 17.5 mm](https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-17-5mm-en.pdf) (PDF, en)
- [Datasheet torsion spring contact band 13 mm](https://www.atlas-contacte.de/downloads/datenblaetter/datasheet-torsion-spring-contact-band-13mm-en.pdf) (PDF, en)
- [Installation drawing torsion spring contact band 17.5 mm, socket version](https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-socket-version-en.pdf) (PDF, en)
- [Installation drawing torsion spring contact band 17.5 mm, pin version](https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-17-5mm-pin-version-en.pdf) (PDF, en)
- [Installation drawing torsion spring contact band 13 mm, socket version](https://www.atlas-contacte.de/downloads/zeichnungen/drawing-torsion-spring-contact-band-13mm-socket-version-en.pdf) (PDF, en)

## Frequently asked questions

### How many louvers does a torsion spring contact band have?

The number of louvers N is the band length divided by the 2.5 mm pitch, or 2.0 mm for the 13 mm band. The configurator calculates the band length for your mating diameter and a guide value for the current rating. The guide value per louver is 20, 28 or 31 A on the 17.5 mm band, depending on material thickness, and 25 A on the 13 mm band.

### Which material thickness should I choose for the torsion spring contact band?

As material thickness increases, the contact resistance per louver falls from 0.55 mΩ at 0.15 mm to 0.30 mΩ at 0.25 mm, and the contact force per louver rises. Thicker bands heat up less at the same current but need a higher insertion force. The configurator shows the guide value for your dimensions.

### What is the leg angle A on the torsion spring contact band for?

The toothed legs on the side rails locate the band in the groove. The angle A of 0°, 15° or 45° sets the width over the legs and therefore the groove width: 17.9 mm at 0° and 15°, 17.3 mm at 45°.

### How do I estimate the insertion force of a torsion spring contact band?

According to the datasheet, the insertion force can be estimated with a friction coefficient of about 0.3. Multiply the contact normal force of all louvers in contact by this coefficient. We can send you the force-deflection curves for each material thickness on request.

### Is the torsion spring contact band interchangeable with louvered contact bands from other manufacturers?

In many cases, yes. The torsion spring contact band is installation-compatible with the contact lamellae of common manufacturers as long as groove diameter and groove width match. Check the groove against the installation dimensions on this page, or send us the drawing of your existing groove.

### Is the torsion spring contact band available 13 mm wide?

Yes. ACA Atlas Contacte makes the torsion spring contact band 17.5 mm and 13 mm wide. The 13 mm band has a 2.0 mm pitch, a material thickness of 0.2 mm and a leg angle of 45°. It is designed for socket mounting, and we make a pin version on request. Choose the 13 mm band width directly in the configurator.

## Related pages

- [Contact lamellae](https://www.atlas-contacte.de/en/products/louvered-contact-bands/): Louvered contact bands with many parallel contact points
- [High-current contact band](https://www.atlas-contacte.de/en/products/louvered-contact-bands/high-current-contact-band/): Stainless spring steel carrier with riveted contact pieces of silver-plated copper
- [Leaf spring contact band](https://www.atlas-contacte.de/en/products/louvered-contact-bands/leaf-spring-contact-band/): Compact beryllium copper contact lamella from 1.5 mm mating diameter
- [Contact types compared](https://www.atlas-contacte.de/en/knowledge/contact-types-compared/): Which contact type suits your current, mating cycles and space
- [Materials and finishes](https://www.atlas-contacte.de/en/knowledge/materials-finishes/): Copper alloys, spring steels and contact platings compared
- [Round pin and socket contacts](https://www.atlas-contacte.de/en/products/plug-contacts/round-pin-socket-contacts/): Stamped flat, then rolled into a pin or a sleeve

## Request torsion spring contact bands

Configure standard versions directly in the [configurator above](https://www.atlas-contacte.de/en/products/louvered-contact-bands/torsion-spring-contact-band/#konfigurator). For special sizes, flange contacts or an existing groove, send us your drawing with mating diameter, version, current and quantity. CAD data and samples are available on request.

- [Send your drawing](https://www.atlas-contacte.de/en/request-a-quote/#zeichnung)
- [Request samples](https://www.atlas-contacte.de/en/request-a-quote/#muster)

**Source:** [Torsion Spring Contact Band 13/17.5 mm | ACA Atlas Contacte](https://www.atlas-contacte.de/en/products/louvered-contact-bands/torsion-spring-contact-band/) · ACA Atlas Contacte GmbH, Wallbacher Straße 5, 79664 Wehr, Germany · Phone +49 7761 4420 · info@atlas-contacte.de · [Request a quote](https://www.atlas-contacte.de/en/request-a-quote/)
