---
title: Press-Fit Pins Manufacturer | ACA Atlas Contacte
description: "Press-fit pins to your drawing: press-fit zone to your PCB hole specification, selectively plated, loose or taped. With a design checklist for the PCB hole."
url: https://www.atlas-contacte.de/en/products/plug-contacts/press-fit-pins/
lang: en-GB
alternate:
  de: https://www.atlas-contacte.de/de/produkte/steckkontakte/einpresskontakte/
alternate_markdown:
  de: https://www.atlas-contacte.de/de/produkte/steckkontakte/einpresskontakte/index.md
last_updated: 2026-11-14T14:05:10Z
breadcrumb: Home > Products > Plug contacts > Press-fit pins
publisher: ACA Atlas Contacte GmbH
---

# Press-fit pins

Press-fit pins, also called press-in contacts, connect a PCB to a connector without a solder joint. ACA Atlas Contacte in Wehr (Baden), Germany, stamps them with a press-fit zone to your drawing, loose or on carrier strip.

## Press-fit instead of soldering

A press-fit pin is a contact pin with a press-fit zone slightly larger than the plated through-hole of the PCB. During pressing, the zone deforms, the hole wall deforms, or both. The result is a cold-formed, gas-tight joint with a high normal force between pin and copper barrel. Solder, flux and an extra soldering pass, with its heat load on the populated board, are no longer needed.

Requirements, test methods and application guidance for these joints are described in IEC 60352-5 (DIN EN 60352-5), part 5 of the series on solderless connections. It is the usual reference when connector and equipment manufacturers qualify a press-fit connection. What is qualified is always the system of pin, PCB and pressing process, and that qualification is the user's responsibility. We supply the press-fit pin with the agreed characteristics and the samples for your tests.

The [press-fit zone](https://www.atlas-contacte.de/en/knowledge/glossary/#term-press-fit-zone) is the most demanding feature of the part. Its cross-section, edge condition and burr position decide whether the hole survives pressing intact or is damaged. We check the zone on your drawing for manufacturability, build the tool stations for it in our own tool shop and adjust them there if your press-in tests call for a correction.

## Compliant or solid press-fit zone

| Criterion | Compliant press-fit zone | Solid press-fit zone |
| --- | --- | --- |
| Principle | The zone deflects during pressing and holds the normal force through its spring-back | The zone stays largely rigid and the hole wall deforms |
| Typical shape | Eye-of-needle or slotted zone | Solid cross-section with defined edges |
| Press-in force | lower | higher |
| Hole tolerance requirement | covers a wider tolerance range | needs a tight tolerance range |
| Stress on the PCB | lower | higher |

Qualitative overview based on the general state of the art. The right zone depends on board thickness, hole build-up and contact geometry and is defined from your hole specification.

## Design notes for the press-fit zone

A press-fit pin starts with the PCB, not with the pin. Only once the hole diameter, tolerance and barrel build-up are fixed can the press-fit zone be designed. We settle these points before tool making starts.

- State finished diameter and tolerance of the plated hole, board thickness and barrel finish
- Define the position of the press-fit zone relative to the board centre, including press-in depth
- Provide a shoulder or push face for the press-in tool
- Match the finish of the zone to the hole finish, tin for example
- Specify burr side and edge condition of the zone on the drawing
- Define press-in and retention force as inspection characteristics if your specification requires them

## Advantages of press-fit technology

### No solder joint

No solder, no flux, no additional heat load on the board and its components.

### Gas-tight joint

The high normal force between zone and barrel keeps the contact interface sealed against the environment.

### Assembly at line speed

Press-fit pins on carrier strip or taped can be fed and pressed automatically, even after the other components have been soldered.

### Two finishes on one pin

With selective plating, a pin can carry gold on the mating end and tin on the press-fit zone, for example.

## Technical data

| Property | Value |
| --- | --- |
| Designs | Press-fit pins, press-in pins, contact pins with press-fit zone |
| Press-fit zone | to customer drawing |
| Reference standard | IEC 60352-5 (DIN EN 60352-5), press-in connections |
| Materials | Copper alloys to your specification |
| Finishes | tin, silver, gold, nickel, also selective (via plating partners) |
| Delivery forms | loose, on carrier strip (reeled), taped |
| Press-in and retention force | on request, per project |
| PCB hole diameter | to your specification |
| Quantities | Samples to large series |

We cite IEC 60352-5 (DIN EN 60352-5) as the reference standard for designing and testing press-fit connections. This does not imply that our parts are certified to it. Forces and dimensions are defined per project.

## From hole specification to series part

1. **PCB data**: Hole, tolerance, barrel build-up, board thickness and the finish required on the mating end.
2. **Zone and tool**: We check the press-fit zone on your drawing for manufacturability and build the tool stations in our own tool shop.
3. **Samples for your press-in tests**: You check press-in and retention force and the condition of the holes on your boards. We make any corrections directly in the tool.
4. **Series delivery**: Delivered loose, on carrier strip or taped to suit your press-fit machine.

## Frequently asked questions

### What is a press-fit pin?

A press-fit pin is a contact pin whose press-fit zone is slightly larger than the plated through-hole of a PCB. Pressing it in creates a cold-formed, gas-tight joint without solder. IEC 60352-5 (DIN EN 60352-5) defines the requirements and tests.

### Are your press-fit pins certified to DIN EN 60352-5?

No, we do not hold a certification to this standard. The standard defines requirements and test methods for the press-fit connection as a system of pin, PCB and process, and that qualification is carried out by the user. We make the pins with the agreed characteristics and supply samples for your tests. Any additional testing is agreed per project.

### What PCB data do you need?

Finished hole diameter and tolerance, board thickness, build-up and finish of the copper barrel, and the planned press-in depth. With these data the press-fit zone can be designed.

### Compliant or solid press-fit zone: which suits my application?

By the general state of the art, compliant zones such as the eye-of-needle need less press-in force and cover wider hole tolerances. Solid zones need tighter tolerances and higher forces. The choice depends on the PCB specification and the loads in service. We advise you from the manufacturing side.

### Can the mating end and the press-fit zone have different finishes?

Yes. With selective plating through our plating partners, the mating end can be gold-plated and the press-fit zone tin-plated, for example.

### Do you supply press-fit pins taped or on carrier strip?

Yes. We supply press-fit pins loose, on carrier strip wound on reels, or taped, matched to the feeder of your press-fit machine.

## Related pages

- [Plug contacts](https://www.atlas-contacte.de/en/products/plug-contacts/): Press-fit pins, flat tabs, round pin, socket and fork contacts
- [Round pin and socket contacts](https://www.atlas-contacte.de/en/products/plug-contacts/round-pin-socket-contacts/): Stamped flat, then rolled into a pin or a sleeve
- [Contact strips](https://www.atlas-contacte.de/en/products/contact-strips/): Single and multi-component strips, selectively plated on request
- [Surface finishes](https://www.atlas-contacte.de/en/services/surface-finishes/): Electroplated finishes through qualified partners
- [Tool making](https://www.atlas-contacte.de/en/services/tool-making/): Stamping and bending tools from our own toolroom
- [Designing stamped parts](https://www.atlas-contacte.de/en/knowledge/designing-stamped-parts/): Rules of thumb for bend radii, hole diameters, web widths and tolerances

## Request a quote for press-fit pins

Send us the pin drawing and the hole specification of your PCB. We review both together and send you a quote with a sample plan.

- [Send request with drawing](https://www.atlas-contacte.de/en/request-a-quote/)
- [Request samples](https://www.atlas-contacte.de/en/request-a-quote/#muster)

**Source:** [Press-Fit Pins Manufacturer | ACA Atlas Contacte](https://www.atlas-contacte.de/en/products/plug-contacts/press-fit-pins/) · ACA Atlas Contacte GmbH, Wallbacher Straße 5, 79664 Wehr, Germany · Phone +49 7761 4420 · info@atlas-contacte.de · [Request a quote](https://www.atlas-contacte.de/en/request-a-quote/)
