Gold-plated contacts on carrier strips, contact lamellae, sleeves, springs and stamped parts on a grey table in a spotlight

Manufacturer since 1987 Wehr, Germany

Contact lamellae and stamped parts, made in Germany

ACA Atlas Contacte makes contact lamellae (louvered contact bands) for connectors and precision stamped and bent parts to your drawing: two core competences in electrical contacts, from tooling to series production at one site.

  • Samples to series
  • ISO 9001:2015 (DQS)
  • In-house tool making

01 Core competences

Two core competences, one site

ACA Atlas Contacte GmbH in Wehr (Baden), Germany, has two core competences: contact lamellae for connectors and precision stamped and bent parts to drawing. Design, tool making and series production for both are at one site.

  • Silver-plated 17.5 mm torsion spring contact band as an open ring on a dark background, with twisted louvers and outward legs

    Contact lamellae

    Contact lamellae are contact bands with many parallel contact points for pins and sockets. ACA makes them in three types of its own, from signal transmission up to high-current applications.

    Types
    leaf spring, torsion spring and high-current contact band
    Materials
    copper beryllium, stainless spring steel with silver-plated copper contacts
    Sizes
    standard sizes configurable online, special dimensions with our own tools
  • Stamped and bent parts in stainless steel, brass and copper: bracket, flat tabs on the carrier strip, spring clip and contact parts

    Stamped and bent parts

    Stamped and bent parts are metal parts that are punched and bent from strip or wire. ACA makes them to your drawing: contact springs, plug and switching contacts, terminal parts, contact strips and assemblies.

    Process
    progressive die or stamping-bending machine
    Materials
    copper alloys, steel and stainless steel
    Secondary operations
    contact welding, riveting, threading and assembly in-house

02 Products

Eight product families, all made in-house

All eight product families are made with the same in-house process chain: own tool making, series stamping and bending and, depending on the part, contact welding, riveting, threading and assembly. Choose the family closest to your part.

All products at a glance

03 Contact lamellae

Contact lamellae: many contact points, low contact resistance

A louvered contact band spreads the current across many louvers (contact webs) connected in parallel. Each louver carries only part of the current. As with resistors in parallel, the total resistance falls with the number of louvers, and the permissible total current is the sum of the partial currents.

The reliable contact of ACA contact lamellae has been proven millions of times. ACA makes them in three types. The leaf spring and torsion spring contact bands are made of copper beryllium. The high-current contact band combines a stainless spring steel carrier with silver-plated copper contacts. The band is fitted into a groove in the socket or on the pin, where it snaps into place and is held captive. Large diameters and flat arrangements need additional fixing. Standard sizes can be configured online. Special dimensions are made with our own tools. Contact lamellae in detail

Leaf spring contact lamellae in a silver-plated pin version and a gold-plated socket version
Loading 3D model …

The 3D model could not be loaded.

Your browser cannot display 3D graphics. You are seeing a rendered image of the part.

Drag to rotate, scroll or pinch to zoom. Keyboard: arrow keys rotate, plus and minus zoom, 0 resets the view.

Leaf spring contact band Illustration · CAD data on request

04 Progressive die

How a copper strip becomes a contact

In a progressive die the strip passes through a series of stations. With every press stroke it advances by exactly one pitch, and each station adds part of the geometry. At the end, every stroke releases a finished part, or the parts stay on the carrier strip and are delivered on a reel. Six steps show the sequence for an example part. Which stations a die needs depends on the part.

Illustration: stamping strip in a progressive die, station by station from strip infeed to the cut-off of the finished part
Illustration · CAD data on request
  1. Coil feed and pilot holes

    The strip runs from the coil through the feeder into the die. The first station pierces pilot holes. On every stroke, pilots engage them and locate the strip precisely at all following stations.

  2. Piercing

    Round holes, slots and windows are pierced while the strip is still flat. In this state their position can be held most accurately.

  3. Cutting free

    Cutting punches cut the outline of the part free. Narrow bridges keep it attached to the carrier strip so that it travels safely to the next station.

  4. Forming and coining

    Coining punches emboss contact dimples, beads and reduced cross-sections into the part. They define where the part will make contact and its spring rate.

  5. Bending

    Several bending stages give the part its three-dimensional shape. Bend radii and the springback of the material are already allowed for in the tool design.

  6. Cut-off or reel

    The last station separates the part from the strip, and it is delivered as loose bulk parts. Alternatively, it stays on the carrier strip and is wound on a reel, ready for automatic processing. Two-component parts receive their contact piece by inline resistance welding during stamping.

05 Process

From first consultation to series production

  1. Consulting

    We check your drawing for manufacturability: material, bend radii, tolerances and delivery form. You get design-for-stamping advice before a tool is built. For contact lamellae we agree the type, the installation dimensions and the current-rating guide value. More: Consulting and engineering, Designing stamped parts

  2. Design

    From the part drawing we develop the blank and the strip layout, and from these the design of the progressive or stamping-bending die.

  3. In-house tool making

    Our tool shop makes cutting and bending punches, dies and die plates using EDM and grinding, also for contact lamellae in special dimensions. Changes are made in-house. Tool making

  4. Samples and prototypes

    Trial samples and prototypes show whether part and function fit. Low-volume runs are possible too. Prototypes and low-volume runs

  5. Series production

    Series parts run on automatic stamping and stamping-bending machines, with contact welding, riveting, threading and assembly as required. Already have a tool? We also take over existing tools. Tool transfer

ACA Atlas Contacte GmbH founded by engineer Ernst Raimann
1987
successful projects in stamped parts and contact lamellae
1,000+
certified to ISO 9001, today to ISO 9001:2015 by DQS, valid until July 2027
since 2000

06 Quality

Inspected to drawing, certified to ISO 9001:2015

The quality management system of ACA Atlas Contacte GmbH is certified to ISO 9001:2015 by DQS, valid until July 2027. Its scope covers the development of stamping and bending tools, the manufacture of precision stamped and bent parts and contact parts, contact welding, thread cutting and assembly.

We measure the outlines and distances of stamped parts and contact lamellae without contact on an optical image measuring system, and check the spring forces of contact springs during series production against your force-travel specification. More about quality assurance

  • Optical image measuring system and measuring microscope in our own measuring room
  • Product-specific tests to your specification
  • Certificate available as a PDF download

07 Company

A family business on the High Rhine

ACA Atlas Contacte is a family-run company with a single site in Wehr (Baden), in the district of Waldshut close to the Swiss border. Engineer Ernst Raimann founded the GmbH in 1987. The managing director is Dr.-Ing. Andreas Raimann.

Our parts work today in e-mobility and charging infrastructure, in battery systems, in industrial connectors, automation and robotics, in measuring and test technology up to medical technology, and in energy transmission, welding and photovoltaics.

When you send an enquiry, you talk to specialists from design and tool making. We welcome complex and unusual requirements. About the company

  • Founded in 1987, family-run
  • Design, tool making, production and measuring room under one roof
  • One site, short lines of communication
  • Technical contacts who know the tool and the process
Company building in Wehr seen from the street: driveway, grey hall, red office wing and white hall with the company sign
Our head office in Wehr (Baden)

08 FAQ

Frequently asked questions

What does ACA Atlas Contacte GmbH manufacture?

ACA Atlas Contacte GmbH in Wehr (Baden), Germany, has two core competences: contact lamellae and precision stamped and bent parts. It makes contact lamellae in three types, as leaf spring, torsion spring and high-current contact bands for pins and sockets. Stamped and bent parts are made to customer drawings, among them contact springs, contact strips, plug and switching contacts, terminal parts and assemblies. Tool making, sampling and series production are all in-house.

Which contact lamellae does ACA make, and can I configure them online?

ACA Atlas Contacte makes contact lamellae in three types of its own: the leaf spring contact band from 1.5 mm mating diameter in 21 standard sizes, the torsion spring contact band in 17.5 mm and 13 mm widths and the 12 mm high-current contact band. In the lamella configurator you choose the type, the pin or socket version and the dimensions, and get a current-rating guide value. Special dimensions are made with ACA's own tools.

Who makes stamped parts and electrical contacts to drawing in south-west Germany?

ACA Atlas Contacte GmbH in Wehr (Baden), Germany, in the district of Waldshut near Basel, Switzerland, has made stamped and bent parts and electrical contacts to customer drawings since 1987. It has its own tool shop and is certified to ISO 9001:2015.

Does ACA also make prototypes and small series?

Yes. Alongside series production, ACA offers trial samples, prototypes and low-volume runs. Which route is economical for a part, a progressive die, a stamping-bending machine or a low-volume run first, depends on its geometry and quantity and is agreed on the basis of the drawing. ACA also makes contact lamellae in special dimensions in small quantities.

Which materials and finishes are possible?

ACA processes strip and wire in steel, stainless steel and non-ferrous metals, mainly copper alloys. Contact lamellae are made of copper beryllium or, for the high-current contact band, of stainless spring steel with silver-plated copper contacts. Plated finishes such as silver, nickel, gold or tin are applied by plating partners, selectively on the strip if required.

Request a quote

Stamped part or contact lamella? Ask for a quotation.

For stamped parts, send us your drawing, quantity, material and preferred delivery form. For contact lamellae, give us the type and dimensions or choose a standard size in the lamella configurator. You receive a quotation, with samples if required.