Aerial view of the ACA plant in Wehr: halls with solar PV roofs, white hall, red office annex and forecourt beside fields

Company

The history of ACA Atlas Contacte GmbH

ACA Atlas Contacte GmbH was founded in 1987 and has manufactured stamped and bent parts and electrical contacts ever since. The timeline shows the key milestones on the way to today's plant in Wehr (Baden), with its own tool shop and quality management to ISO 9001:2015.

The plant in Wehr (Baden) from the air, February 2023.

01 The beginnings

Stamping and bending with a history

In 1987 engineer Ernst Raimann founded ACA Atlas Contacte GmbH and took over the know-how, staff and machines of Finzer Säckinger Maschinenfabrik. Experience in stamping and bending, qualified staff and machines were therefore in place from the start.

From a start in rented premises, today's plant grew step by step: first its own premises in Wehr, then its own tool shop, certified quality management and new production technology. The constant throughout was the product: custom stamped and bent parts and electrical contacts.

Stamped and bent parts from series production as bulk goods

02 Timeline

Key milestones

From its foundation in 1987 to the recertification in 2024, the timeline shows the key milestones of ACA Atlas Contacte GmbH.
  1. Foundation

    Engineer Ernst Raimann founds ACA Atlas Contacte GmbH and takes over the know-how, staff and machines of Finzer Säckinger Maschinenfabrik. The business starts in rented premises.

  2. Own premises in Wehr

    ACA moves into its first own premises on Wallbacher Straße in Wehr, today's headquarters.

    ACA Atlas Contacte building in Wehr (Baden): red office wing and light production hall in front of wooded hills
    1994 Head office on Wallbacher Straße in Wehr, earlier view
  3. Management strengthened

    After university and work as a development engineer in the automotive supply industry, Dipl.-Ing. Andreas Raimann joins the management.

  4. In-house tool shop

    An investment in EDM technology creates the company's own tool shop for stamping and bending dies.

    Steel tool plate with EDM-cut openings, fitted cutting inserts and threaded holes
    1999 Tool plate with EDM-cut openings from the in-house tool shop
  5. First ISO 9001 certification

    DQS certifies the quality management system to DIN ISO 9001 for the first time.

  6. Production area doubled

    An extension doubles the production area.

  7. Optical 100 % inspection

    An optical inspection system makes 100 % inspection of parts possible.

    Optical image measuring system showing the outline of a contact lamella band, with a measuring microscope beside it.
    2008 In-house optical measurement
  8. Development building

    A further extension creates space for design and development.

  9. 25 years of ACA Atlas Contacte

    The company celebrates 25 years of stamping and contact technology.

  10. Multi-component contact strips in series

    Series production of multi-component contact strips begins.

  11. Servo stamping-bending machines

    New stamping-bending machines with servo drives modernise production.

    Working area of a stamping and bending machine with round mounting plate, radial bending slides and punching unit.
    2017 Stamping and bending machine in series production
  12. High-speed presses add capacity

    Two new high-speed stamping presses go into operation and create free capacity for new projects.

  13. Towards CO₂-neutral production

    On the way to CO₂-neutral production, ACA introduces an electric vehicle fleet, LED lighting, a photovoltaic system and energy-efficient machines.

  14. ISO 9001:2015 recertification

    DQS certifies the quality management system to ISO 9001:2015 again. The certificate is valid until 2 July 2027. Details are on the quality and certificate page.

03 Today

What has not changed

Technology has changed since 1987. Today the tool shop works with EDM and grinding, series parts run on automatic stamping and stamping-bending machines, and parts are measured in our own measuring room, among other equipment on an optical image measuring system. What has not changed: the family ownership and our work to customer drawings.

Our in-house capabilities have grown along the way. With its own tool shop, tool changes became an internal task. With the development building, design got its own space. Multi-component contact strips and inline welding of two-component parts extended the range beyond the simple stamped part.

Today we make contact springs, contact lamellae, contact strips, plug and switching contacts, terminal parts and assemblies. The overview shows all products.

Opened stamping die seen from above with strip guides, cutting openings and two ball-bearing guides.

Request a quote

The next milestone is your project

Send us your drawing. We check manufacturability and quote for tooling and series production.