Contact parts on carrier strip, selectively gold plated, with a row of small contacts on a strip below, on a light table

Products

Contact strips and multi-component contact strips

ACA Atlas Contacte in Wehr (Baden), Germany, makes contact strips, punched strips and multi-component contact strips to customer drawings: stamped contacts on carrier strip, supplied reel-to-reel, strip with welded or riveted contact material, and parts stamped from clad or selectively plated strip.

Joining methods
In-die welding , riveting
Finishes
Ag , Au , Ni , Sn , bare
Delivery forms
Reel , taped , sections , loose
Quality management
ISO 9001:2015

01 Overview

Contact material exactly where it is needed

Contact strips are stamped strips that carry contact functions, in other words stamped and bent parts supplied as strip. At ACA Atlas Contacte in Wehr (Baden) this covers two product groups: contact parts that stay on the carrier strip and go to your assembly line on reel, and multi-component contact strips, in which a carrier material and a contact material are joined into one strip.

There is a technical and an economic reason for combining two or more materials in one strip. A spring material provides the contact force, while a highly conductive or precious-metal contact material carries the current. The expensive material then sits only at the contact point, not throughout the whole part.

ACA Atlas Contacte is the processor, not the strip producer. We process clad strip and contact profiles as semi-finished products, and partner companies do the electroplating. We do the stamping, bending, welding and riveting ourselves and coordinate the entire chain.

Technical drawing: multi-component contact strip in front view, top view and profile

02 Construction

How a multi-component contact strip is built

A multi-component contact strip joins at least two materials into one continuous strip. The carrier strip provides spring force and dimensional stability, while contact pieces or applied contact material carry the current. ACA Atlas Contacte has made multi-component contact strips to customer drawings in series production since 2015. We join the components by inline resistance welding during stamping or by riveting, or process them as pre-clad strip. They are supplied as continuous strip, as strip sections or on reels.

One example from our own range is the high-current contact band. A carrier strip of stainless spring steel with very good resistance to stress relaxation generates the contact force. Riveted, silver-plated contact pieces of high-conductivity copper carry the current and absorb enough heat to give the band a high short-time withstand current. It is supplied as continuous strip or as strip sections with a defined number of contacts.

  • Carrier strip for spring force and dimensional stability
  • Contact material for current transfer and heat absorption
  • Joined by in-die resistance welding, by riveting or as pre-clad strip
  • In series production since 2015, supplied as continuous strip, strip sections or on reels
  • High-current contact band as continuous strip or strip sections
Section of a contact strip: eight formed contact springs on a copper carrier strip, tips selectively silver-plated
Loading 3D model …

The 3D model could not be loaded.

Your browser cannot display 3D graphics. You are seeing a rendered image of the part.

Drag to rotate, scroll or pinch to zoom. Keyboard: arrow keys rotate, plus and minus zoom, 0 resets the view.

Multi-component contact strip Illustration · CAD data on request

03 Methods

Four ways to put contact material on the strip

Four ways to put contact material on the strip
Criterion Selectively plated Clad strip or contact profile Welded in-die Riveted
Contact layer applied by electroplating, only in defined zonesalready in the semi-finished strip, as an inlay/onlay stripe or profilein the press stroke by resistance weldingmechanically via a rivet
Done by plating partners, coordinated by ACAACA (stamping and bending)ACA, during stampingACA
Suited to thin precious-metal layers on plug and spring contactscontinuous contact zones along the striptwo-component parts in a single passthick contact pieces and material pairs that are hard to weld

Which route is economical depends on contact area, layer thickness, quantity and material pairing. We recommend the right route on the basis of your drawing.

04 Technical data

Contact strips: technical data

Multi-component contact strip on a reel, contact tips selectively silver-plated
Contact strips: technical data
Property Value
Types Contact parts on carrier strip, multi-component contact strips, parts from clad strip and contact profiles
Joining methods Inline resistance welding during stamping, riveting
Plating Electroplated, all-over or selective (through plating partners)
Finishes Silver, gold, nickel or tin plated, or bare
Material combinations to your specification, on request
Strip width and material thickness on request
Delivery forms On reel, taped (bandoliered), strip sections, loose as single parts
Reels and packaging on request
Quality management ISO 9001:2015, scope covers single and taped contact parts and contact welding

Strip widths, material thicknesses and material combinations are defined per part and confirmed in the quotation.

Last updated:

05 Benefits

What contact strips from ACA mean for your production

Contact springs in the strip: weld seam between the copper terminal area and the spring bronze zone
  • Precious metal only at the contact point

    Selective plating, clad strip or applied contact pieces reduce precious-metal use compared with fully plated parts.

  • In-die welding

    Contact material is resistance-welded on in the same pass in which the part is stamped.

  • Parts on reel and taped for automated assembly

    Parts on reel or on tape feed straight into automated assembly and insertion lines.

  • One supplier responsible for the chain

    We coordinate semi-finished material, stamping, joining and plating. You deal with one contact and one drawing.

  • Tooling built around the contact zone

    Strip layout and tool are designed in our own tool shop around the position of the contact zone in the strip.

06 Portfolio

Contact strips from our portfolio

We make these contact strips and strip products to customer drawings:

Contact parts wound on a reel with paper interleaving, contact tips silver-plated
  1. Multi-component contact strips of carrier strip and contact material
  2. Contact strips with contact material welded on inline
  3. Spring strips with riveted contact pieces, such as the high-current contact band
  4. Electroplated and selectively plated strip
  5. Parts stamped from clad strip
  6. Parts stamped from contact profiles
  7. Punched strips with contact parts on the carrier strip, on reel
  8. Taped (bandoliered) contact parts for automated insertion
  9. Contact lamellae as flat strip and strip sections

07 Process

From material concept to reel

  1. Consulting

    We agree the material pairing, the position and size of the contact zone and the delivery form for your assembly.

  2. Design

    We define the strip layout with the contact zone and choose how the contact material is applied: welding, riveting, clad strip or selective plating.

  3. Tool making

    The tool is built in our tool shop and matched to in-die joining.

  4. Samples

    Samples confirm contact position, adhesion and dimensions, and show whether the strip runs cleanly in your feeder.

  5. Series

    Series production on reel, taped or in sections, inspected to your specification.

08 Applications

Where our contact strips are used

  • High-current contacts

    Electric vehicles, charging infrastructure, high-performance battery systems and contacts in electroplating plants.

  • Connectors

    Contact parts on carrier strip for automated assembly of signal and power contacts.

  • Switchgear

    Contact carriers with welded or riveted contact material.

FAQ

Frequently asked questions

What is a multi-component contact strip?

A multi-component contact strip is a strip made of at least two materials: a carrier material that provides spring force and shape, and a contact material that carries the current. ACA Atlas Contacte joins the components by inline resistance welding during stamping or by riveting, or processes them as pre-clad strip. ACA has made multi-component contact strips in series since 2015 and supplies them as continuous strip, strip sections or on reels.

Does ACA plate contact strips in-house?

No. Electroplating of contact strips is done by partner companies. ACA Atlas Contacte specifies the plating, coordinates the process chain and supplies electroplated or selectively plated strip and parts from a single source.

Does ACA make parts from clad strip and contact profiles?

Yes. ACA Atlas Contacte stamps and bends parts from clad strip and contact profiles so that the contact zone sits in the functionally correct position on the finished part.

How are contact strips supplied?

ACA Atlas Contacte supplies contact strips on reel, taped, as strip sections or as loose single parts. Reel size and packaging are matched to the customer's feeding system.

When is a welded contact better than plating?

A welded contact pays off when the contact point needs more material than an electroplated layer can provide, for example at high currents or switching loads. For thin precious-metal layers on plug contacts, selective plating is usually more economical. ACA Atlas Contacte offers both routes.

Request a quote

Request a contact strip quotation

Send us your drawing, preferred material pairing or finish, annual quantity and your requirements for reel and feeding. We propose the most economical design.