Knowledge

Guides to stamping and contact technology

Materials, finishes, contact types and design rules for stamped and bent parts and electrical contacts, compiled by ACA Atlas Contacte GmbH in Wehr (Baden), Germany. For design engineers who want to get the early decisions right, and for buyers who need to compare quotes.

Torsion spring contact band in the groove of a socket with inserted pin, section view
Guides
4
Figures
13
Last updated

01 Overview

Knowledge that belongs on the drawing

Most of the cost of a stamped part or an electrical contact is fixed at the design stage, long before a tool is built. Material, finish, bend radii and contact principle determine unit price, tooling effort, current rating and service life. Engineers who understand these relationships write better specifications and receive quotes that can genuinely be compared.

These guides collect what matters for precision stamped and bent parts, contact springs and contact lamellae. They explain principles and trade-offs, but they do not replace the design of your part. We define binding values together with you, based on your drawing, your quantities and your operating conditions.

02 Guides

Four guides

  1. 01

    Materials and finishes

    CuSn, CuBe, CuNiSi, CuFeP, brass, copper, stainless and carbon spring steel compared: conductivity against spring properties. Plus silver, tin, gold and nickel and when each finish makes sense.

    Reading time about 12 min2 Figures

  2. 02

    Contact types compared

    Leaf spring, torsion spring and high-current contact bands, slotted sockets, canted coil springs, hyperboloid contacts, stamped cantilever contacts and fork contacts. Current rating, mating cycles, insertion force, installation space and cost in one table.

    Reading time about 12 min4 Figures

  3. 03

    Designing stamped parts

    Rules of thumb for bend radii, hole diameters and web widths, plus burr side, rolling direction, tolerances, carrier strip design and notes on plated parts.

    Reading time about 10 min7 Figures

  4. 04

    Glossary

    77 technical terms, such as bend radius, press-fit zone and rolling direction, explained in a few sentences and each linked to the matching product, service or guide page.

    77 terms

03 Sources

General principles, applied to real parts

These guides summarise generally accepted principles of stamping and contact technology and relate them to production as ACA Atlas Contacte GmbH runs it in Wehr: with its own tool shop, progressive dies, stamping and bending machines and a measuring room. Where a rule reaches its limits, the page says so.

General rules of thumb are labelled as such and match our production practice. Ratings for our contact lamellae come from ACA datasheets, installation drawings and the previous ACA product pages. Where no reliable value exists, the page says "on request".

  • Standards named by designation, for example DIN 6930-2 and IEC 60352-5
  • With a last-updated date on every page
  • No substitute for testing in the actual installation
Optical image measuring system showing the outline of a contact lamella band, with a measuring microscope beside it.

04 Products

From guide to part

Request a quote

Can't find your answer?

Send us your drawing or describe your application. You will receive a technical assessment and a quotation.