Products
Plug contacts
ACA Atlas Contacte in Wehr (Baden), Germany, makes plug contacts, contact pins and other stamped connector contacts to your drawing for signal and power transmission, with design, tool making and production under one roof.
Drag to rotate, scroll or pinch to zoom. Keyboard: arrow keys rotate, plus and minus zoom, 0 resets the view.
- Starting material
- Strip and wire
- Production
- Progressive die
- Delivery forms
- bulk , reeled , taped
- Quality management
- ISO 9001:2015 (DQS)
01 Overview
Custom plug contacts made to drawing
A plug contact has to fit one specific housing, one specific PCB and one specific mating part. Catalogue parts rarely meet all three conditions at once. That is why we make plug contacts to customer drawings: custom contact pins, flat tabs, sockets, press-fit pins and fork contacts, stamped and formed in a progressive die or on an automatic stamping and bending machine, from strip or from wire.
Plug contacts are a staple of our production. We know where a contact part fails in series production: a lead-in chamfer that ends up too sharp after plating, a spring arm whose force varies with strip thickness, a cut-off point on the carrier strip that leaves a burr exactly where the mating contact slides. We settle these details at the design stage, before the first punch is ground.
Because design, tool making and production are under one roof in Wehr, changes to a plug contact go straight into the tool. From the first trial samples to high-volume production you deal with the same people. ACA Atlas Contacte is a family business, founded in 1987, with more than a thousand successful projects and certified to ISO 9001 since 2000.
02 Types
Plug contacts by type
03 Fork contacts
Fork contacts: contact through the cut edges or through inserted lamellae
A fork contact is a plug contact with two spring arms that clamp a mating part between them like the tines of a fork, for example a blade, a flat tab, a pin, a copper bar or the edge of a circuit board. The typical design is the flat stamped fork: the spring arms lie in the strip plane, and the mating part is contacted between the cut edges of the two arms. On insertion the arms spring apart in the strip plane, and their preload creates the contact force at two opposing cut edges.
For higher currents, ACA Atlas Contacte also makes fork contacts with inserted contact lamellae: lamellae sit in the slot of the fork body, press against the mating part when the fork is pushed on, for example a copper bar, and carry the current through many parallel contact points instead of two cut edges.
ACA Atlas Contacte makes fork contacts to your drawing, flat stamped in a progressive die or with inserted lamellae. With the flat stamped fork, strip thickness, cut quality and the contour of the fork opening determine the contact behaviour. Fork opening, spring travel, contact force and current rating are agreed with you on the basis of the mating part, and values are available on request. Delivery form and finish follow your specification, for example loose or on carrier strip, silver- or gold-plated.
- Flat stamped fork: spring arms in the strip plane, contact through the cut edges
- For higher currents: fork with inserted lamellae, many contact points, for example on a copper bar
- Mating part to your design, for example a blade, flat tab, pin or copper bar
- Delivery form, finish, dimensions and currents as agreed
04 Portfolio
Portfolio: plug contacts, contact pins and contact parts
A selection of the designs we make to customer drawings. The delivery form follows your downstream process.
- Contact pins and square pins from square wire, formed or stamped
- Contact pins stamped from strip, on carrier strip for automatic insertion
- Press-fit pins for printed circuit boards
- Flat tabs and flat receptacles
- Round pins, round sockets and rolled sockets
- Rolled contacts from strip
- Fork contacts, flat stamped or with inserted lamellae for higher currents
- Solder contacts, solder tags and solder pins
- Signal and power contacts for connectors
- Multi-part contact parts, riveted or welded
- Contact lamellae as the contact element in high-current connectors
05 Design
What matters in a plug contact
-
Contact force and insertion force
Spring arm length, material thickness and temper decide how firmly the contact presses on its mate and how much force insertion takes. Force-travel requirements are agreed with you as an inspection characteristic.
-
Finish at the contact point
Tin, silver, gold or nickel, applied by our plating partners. Selectively plated strip puts precious metal only where the contact mates. Our guide to materials and finishes explains the choice.
-
Retention in the housing and on the PCB
Latching lances, embossings, barbs and press-fit zones are formed directly in the tool, so the contact sits exactly where your drawing puts it after assembly.
-
Delivery form for your assembly line
In bulk, on carrier strip, taped or in magazines. Contact pins on carrier strip or taped feed straight into your insertion or press-fit machines.
-
Tools built in-house
We design and build progressive dies and tool sets for automatic stamping and bending machines ourselves. We also take over existing tools, see tool transfer.
06 Square wire pins
Square wire contact pins: formed or stamped
A square pin is a contact pin with a square cross-section and the classic plug contact for PCBs and connectors. ACA Atlas Contacte makes contact pins from square wire, formed or stamped. Either way the pin keeps the drawn side faces of the wire. Point, chamfer, knurl or grooves are produced by forming.
If a contact pin needs a contour that cannot be formed from wire, it is made from strip. Stamped from strip, the pin can take any contour: shoulders, press-fit zones, solder terminations and the carrier strip for delivery on strip all come from the same tool. Which route is right depends on geometry, cross-section and downstream processing. Send us your drawing and we will recommend a process and explain why.
- From square wire, formed or stamped: drawn side faces over the full length
- Point, chamfer, knurl or grooves produced by forming
- Alternatively stamped from strip: free contour with shoulder, press-fit zone or solder termination, also on carrier strip
07 Technical data
Technical data
| Property | Value |
|---|---|
| Starting material | Strip and wire, including square wire |
| Materials | Copper alloys, steel, stainless steel and other non-ferrous metals to your specification |
| Finishes | tin, silver, gold, nickel, also selective (via plating partners) |
| Production | Progressive die or automatic stamping and bending machine |
| Delivery forms | bulk, on carrier strip (reeled), taped, in magazines |
| Secondary operations | Contact welding, riveting, threading, assembly |
| Material thickness and wire cross-section | on request |
| Tolerances | on request, to drawing |
| Quantities | Trial samples, prototypes, small to large series |
| Quality management | ISO 9001:2015, certified by DQS |
We make plug contacts to customer drawings. Dimensions, tolerances and forces are agreed with you. Values without a published basis are given on request.
Last updated:
08 Applications
Signal and power transmission
-
Conductor rail connectors for cranes
An application example for our plug contacts: connectors for the conductor rail that supplies a crane system with power.
-
Contact pins and press-fit pins for PCBs
Contact pins, press-fit pins and solder pins make the electrical connection between a printed circuit board and its connector.
-
High-current connectors
Where a single spring contact reaches its limit, contact lamellae spread the current over many parallel contact points.
09 Process
From drawing to series contact
-
Consulting
You send a drawing or 3D model, the mating part and the quantities. We clarify function, installation and inspection characteristics.
-
Design
We check manufacturability: bend radii, web widths, cut-off position on the carrier strip, burr direction at the contact faces.
-
Tool making
Our tool shop builds the progressive die or the tool set for the automatic stamping and bending machine.
-
Samples
Trial and initial samples for your mating and installation tests, or prototypes beforehand if needed.
-
Series
Series production in Wehr, in bulk, on carrier strip or taped, with inspection of the agreed characteristics.
FAQ
Frequently asked questions
Do you sell plug contacts from a catalogue or only to drawing?
We make plug contacts to your drawing. If you do not have a drawing yet, we develop the contact part with you from the installation space, the mating part and your requirements. Standard sizes are available for our contact lamellae.
Can you supply contact pins taped or on carrier strip?
Yes. Besides bulk we supply parts on carrier strip, taped or in magazines. We choose the delivery form to suit your insertion line or press-fit machine.
Do you also make solder tags and solder pins?
Yes. We make solder contacts, solder tags and solder pins as single parts or formed onto a larger stamped part. A solderable finish such as tin is applied by our plating partners.
Who plates the plug contacts?
Electroplated finishes such as tin, silver, gold or nickel are applied by specialised plating partners, selectively if required. We coordinate the process, so you receive the finished part from a single source.
Is a tool worthwhile for small quantities?
That depends on quantity, product life and part geometry. For small quantities we make prototypes and low-volume runs. Whether a series tool, a simpler tool or trial samples come first depends on your quantities and deadlines. See prototypes and low-volume runs.
Can you take over our existing tool?
Yes, we take over existing tools and continue production with them. We inspect the tool first and tell you whether it needs repair or modification. See tool transfer.
Request a quote
Request a quote for your plug contact
Send us the drawing, material, finish and quantities, ideally with details of the mating part. You will receive a quote including the tooling concept.