Stamped and bent parts
Made to drawing in steel, stainless steel and copper alloys
Services
ACA Atlas Contacte in Wehr (Baden), Germany, offers metal stamping as a complete process chain for stamped and bent parts and electrical contacts: consulting, design, in-house tool making, samples, low-volume runs and series production. Contact welding, riveting, threading and assembly are done in our own plant.
01 Overview
ACA Atlas Contacte GmbH is a manufacturer of stamped and bent parts and electrical contacts that takes responsibility for every step, from the first conversation to series deliveries. Low-volume runs and prototypes are part of the offer in their own right, not just a step towards high volumes.
For you as a buyer or design engineer, that means one point of contact and one party responsible for both tool and part. There is no interface between a toolmaker and a stamping shop where information gets lost. The person who designs your tool knows the machine it will run on and the inspection characteristics your part has to meet. When your drawing changes, we make the change in our own tool shop.
The whole chain is certified: our quality management system to ISO 9001:2015 (DQS) explicitly covers the development of stamping and bending tools, the manufacture of precision stamped and bent parts and contact parts, loose or taped, as well as contact welding, thread cutting and assembly.
02 Services
Design for manufacture from the first sketch
Stamping and bending tools from our own toolroom
We take over and maintain your existing tools
Samples and small batches before the series tool
Resistance welding and riveting in-house
Thread cutting, thread forming and assembly
Electroplated finishes through qualified partners
03 Process
You send a drawing, a 3D model or a specification. We review material, finish, tolerances, quantities and delivery form and tell you where the part becomes expensive and what could be changed.
We optimise the part for stamping and define the manufacturing concept: progressive die or stamping and bending machine, with or without inline welding, threading and assembly. See consulting and engineering.
Our tool shop builds the tool in-house and maintains it for the entire life of the series.
On request we produce first samples for your approval before series production. We state the cost of samples in the quotation, and otherwise our general terms of sale (AVB, PDF in German) apply. See prototypes and low-volume production.
We produce anything from low-volume runs to high volumes and deliver loose, on reel, taped or in magazines.
04 Tooling
The tool determines part quality, unit cost and delivery reliability. ACA builds progressive dies and stamping and bending tools in its own tool shop. Contours are cut by EDM, plates are ground, and when a punch wears or your drawing gets a new revision, we modify the tool in-house.
Is your tool currently with another supplier? We also take over existing tools. During a tool transfer we inspect the tool, run it in on our machines, refurbish it where necessary and then continue series production.
05 Production
Whether you need a handful of samples for a first function test or a series that will be called off for years, ACA makes prototypes and low-volume runs as well as high-volume series from strip and wire. Parts are produced in progressive dies on stamping presses or on servo-controlled stamping and bending machines. Our quotation explains which process is the economical one for your part.
The delivery form follows your downstream process. Loose parts suit manual assembly and feeding systems, parts on reel and taped parts suit automatic placement, and magazine packing suits springs that would tangle as bulk goods.
06 Secondary operations
We resistance-weld two-component parts inline in the stamping process and rivet contacts on a separate riveting station in-house. See contact welding and riveting.
Tapping, or thread forming inline in the die including threads in extruded holes, captive nuts, riveted or welded assemblies and completion. See threading and assembly.
Silver, tin, gold and nickel plating and selective plating by qualified plating partners, coordinated by us. Read more about surface finishes.
07 Quality
Quality is built into the tool and proven on the part. Among other methods we measure on an optical image measuring system and with a measuring microscope, and we carry out product-specific tests to your specification. For contact springs we check your force-displacement requirements throughout the series.
The quality management system of ACA Atlas Contacte is certified to ISO 9001:2015. You will find the certificate and the scope on our quality page.
FAQ
Yes. ACA Atlas Contacte makes stamped and bent parts and electrical contacts to your drawing, in its own tool shop and production plant in Wehr (Baden), Germany. Standard sizes are available for the contact lamellae. All other parts are made to your drawing.
ACA Atlas Contacte offers design consulting, in-house tool making, the transfer of existing tools, prototypes and low-volume runs, contact welding and riveting, threading and assembly. ACA coordinates electroplated finishes with qualified partners.
A complete process chain means that consulting, design, tool making, samples and series production all take place at one ACA Atlas Contacte site in Wehr (Baden), Germany. You have one point of contact and one supplier responsible for both tool and part.
You send ACA Atlas Contacte a drawing or 3D model with material, finish, annual and batch quantities, delivery form and any special inspection characteristics, using the enquiry form or by e-mail. We review the documents, ask if anything is missing and send you a quotation for tool and parts.
Request a quote
Send us your drawing or 3D model with material, finish, delivery form and estimated annual volume. You will receive a quotation for tool and parts, or our questions if something is missing.