Contact types compared
Which contact type suits your current, mating cycles and space
Products
Stamped and bent parts and contact lamellae (louvered contact bands), the two core competences of ACA Atlas Contacte, and further contact parts in eight product families from one plant in Wehr (Baden), Germany: from contact springs and plug or switching contacts to the high-current contact band. Almost every part is made to your drawing, with our own tools.
01 Overview
ACA Atlas Contacte manufactures custom contact parts and stamped and bent parts from strip and wire. Every product family goes through the same process: tool design and tool making in-house, stamping and bending in progressive dies or on stamping-bending machines, plus contact welding, riveting, threading and assembly as needed.
The product families help you find your way. On the shop floor the boundaries blur: a contact spring with a welded contact piece is also a switching contact, a clamp body with a captive nut is also an assembly. What counts is your drawing, not the category.
Contact lamellae are the exception. The leaf spring, torsion spring and high-current contact bands come in standard dimensions that you can configure online. Special sizes are also possible, made with our own tools.
02 Product families
Made to drawing in steel, stainless steel and copper alloys
Louvered contact bands with many parallel contact points
Clamping, grounding, basket, push-button and retaining springs
Single and multi-component strips, selectively plated on request
Press-fit pins, flat tabs, round pin, socket and fork contacts
Clamp bodies, clamp frames, cage and leaf springs
Riveted and welded assemblies
03 Selection guide
| Your task | Product family | What matters |
|---|---|---|
| Transfer current between a round pin and socket | Contact lamellae | Mating diameter, current, mating cycles. Leaf spring from 1.5 mm mating diameter, torsion spring usually from 8 mm. |
| Very high currents or moving mating parts | High-current contact band | Low contact force per louver, so it also suits dynamic loads. Silver-plated copper contacts carry the current. |
| Make spring contact, ground, hold or clamp | Contact springs | Spring force over the working travel, spring material, relaxation at temperature. |
| Connect a PCB or device by plugging | Plug contacts | Mating face, termination (press-fit, solder, plug-in), finish in the contact zone. |
| Switch current in switchgear | Switching contacts | Contact material and joining method: riveted or welded. |
| Connect a conductor in a terminal | Terminal parts | Screw clamping with nut or formed thread, or spring clamping with a cage spring. |
| Feed contacts from the reel into automatic assembly | Contact strips | Pitch, carrier strip, winding direction, selective plating. |
| Buy several parts ready to fit | Assemblies | Joining method, inspection characteristics of the finished assembly, packaging. |
| A bent part that fits no category | Stamped and bent parts | Material, strip thickness, bend radii, tolerances and quantity. |
Not sure which design fits? Our guide Contact types compared explains the differences. Or send us your drawing and we will propose a design.
04 For every product
We design and build progressive and stamping-bending dies ourselves. Changes are made by the same tool shop that built the die. Tool making
Copper alloys and other non-ferrous metals, steel and stainless steel, including clad and selectively plated strip. Materials and finishes
Inline contact welding during stamping, riveting, thread forming, thread cutting and assembly. Plated finishes through partners. More in Contact welding and riveting, Threading and assembly and Surface finishes.
Loose in bulk, as strip on reels, taped or in magazines, depending on how you process the parts.
Trial samples, prototypes, low-volume and high-volume production from the same plant. Prototypes and low-volume runs
Certified quality management (DQS) for tool development, stamped and bent parts, contact parts, contact welding, thread cutting and assembly. Quality
05 Configure contact lamellae
Contact lamellae have their own configurator: choose the type, pin or socket version, mating diameter, length, material thickness and finish. You immediately see a guide value for the current rating and submit the configuration as an enquiry. Open the lamella configurator
FAQ
ACA Atlas Contacte supplies some common standard sizes of contact lamellae from stock. Beyond that, ACA mainly manufactures parts to customer drawings. Contact lamellae in standard dimensions can be requested through the lamella configurator, and the quotation states availability and lead time.
Yes. ACA Atlas Contacte also makes parts outside its eight product families. Any stamped and bent part from strip or wire that can be made in a progressive die or on a stamping-bending machine can be requested.
ACA Atlas Contacte makes stamped and bent parts to customer drawings, with tools from its own tool shop. Contact lamellae are three types of ACA's own, the leaf spring, torsion spring and high-current contact bands, with standard sizes that you choose in the lamella configurator. ACA also makes contact lamellae in special dimensions with its own tools. For a quotation, send your drawing or 3D model through the request form.
Contact lamellae suit high currents in round connectors. The torsion spring contact band in 17.5 mm and 13 mm widths is usually used from 8 mm mating diameter, the high-current contact band 12 mm for very high currents and moving mating parts.
Request a quote
These are typical parts, not the limits of what we make. Send us a drawing or 3D model with quantity, material and delivery form. We check manufacturability and send you a quotation.